app-misc/g15daemon: Convert to python-r1

3 files changed, 332 insertions, 24 deletions

diff --git a/app-misc/g15daemon/g15daemon-1.9.5.3-r13.ebuild b/app-misc/g15daemon/g15daemon-1.9.5.3-r13.ebuild
new file mode 100644
index 000000000000..ff12695c48d0
--- /dev/null
+++ b/app-misc/g15daemon/g15daemon-1.9.5.3-r13.ebuild
@@ -0,0 +1,161 @@
+# Copyright 1999-2016 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+EAPI=5
+
+PYTHON_COMPAT=( python2_7 )
+GENTOO_DEPEND_ON_PERL="no"
+
+inherit eutils linux-info perl-module python-r1 base
+
+DESCRIPTION="G15daemon takes control of the G15 keyboard, through the linux kernel uinput device driver"
+HOMEPAGE="http://g15daemon.sourceforge.net/"
+SRC_URI="mirror://sourceforge/${PN}/${P}.tar.gz"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64 ~ppc ~ppc64 ~x86"
+IUSE="perl python static-libs"
+
+DEPEND="virtual/libusb:0
+	>=dev-libs/libg15-1.2.4
+	>=dev-libs/libg15render-1.2
+	perl? (
+		dev-lang/perl
+		dev-perl/GDGraph
+		>=dev-perl/Inline-0.4
+	)
+	python? ( ${PYTHON_DEPS} )"
+RDEPEND="${DEPEND}"
+REQUIRED_USE="python? ( ${PYTHON_REQUIRED_USE} )"
+
+PATCHES=(
+	"${FILESDIR}/${P}-forgotten-open-mode.patch"
+	"${FILESDIR}/${P}-overflow-fix.patch"
+)
+uinput_check() {
+	ebegin "Checking for uinput support"
+	local rc=1
+	linux_config_exists && linux_chkconfig_present INPUT_UINPUT
+	rc=$?
+
+	if [[ $rc -ne 0 ]] ; then
+		eerror "To use g15daemon, you need to compile your kernel with uinput support."
+		eerror "Please enable uinput support in your kernel config, found at:"
+		eerror
+		eerror "Device Drivers -> Input Device ... -> Miscellaneous devices -> User level driver support."
+		eerror
+		eerror "Once enabled, you should have the /dev/input/uinput device."
+		eerror "g15daemon will not work without the uinput device."
+	fi
+}
+
+pkg_setup() {
+	linux-info_pkg_setup
+	uinput_check
+}
+
+src_unpack() {
+	unpack ${A}
+	if use perl; then
+		unpack "./${P}/lang-bindings/perl-G15Daemon-0.2.tar.gz"
+	fi
+	if use python; then
+		unpack "./${P}/lang-bindings/pyg15daemon-0.0.tar.bz2"
+	fi
+}
+
+src_prepare() {
+	if use perl; then
+		perl-module_src_prepare
+		sed -i \
+			-e '1i#!/usr/bin/perl' \
+			"${S}"/contrib/testbindings.pl
+	else
+		# perl-module_src_prepare always calls base_src_prepare
+		base_src_prepare
+	fi
+}
+
+src_configure() {
+	econf \
+		--docdir="${EPREFIX}/usr/share/doc/${PF}" \
+		$(use_enable static-libs static)
+
+	if use perl; then
+		cd "${WORKDIR}/G15Daemon-0.2"
+		perl-module_src_configure
+	fi
+}
+
+src_compile() {
+	default
+
+	if use perl; then
+		cd "${WORKDIR}/G15Daemon-0.2"
+		perl-module_src_compile
+	fi
+}
+
+src_install() {
+	default
+
+	find "${ED}" -name '*.la' -exec rm -f {} +
+
+	# remove odd docs installed my make
+	rm "${ED}/usr/share/doc/${PF}/"{LICENSE,README.usage}
+
+	insinto /usr/share/${PN}/contrib
+	doins contrib/xmodmaprc
+	doins contrib/xmodmap.sh
+	if use perl; then
+		doins contrib/testbindings.pl
+	fi
+
+	newconfd "${FILESDIR}/${PN}-1.2.7.confd" ${PN}
+	newinitd "${FILESDIR}/${PN}-1.9.5.3.initd" ${PN}
+	dobin "${FILESDIR}/g15daemon-hotplug"
+	insinto /lib/udev/rules.d
+	doins "${FILESDIR}/99-g15daemon.rules"
+
+	insinto /etc
+	doins "${FILESDIR}"/g15daemon.conf
+
+	# Gentoo bug #301340, debian bug #611649
+	exeinto /usr/lib/pm-utils/sleep.d
+	doexe "${FILESDIR}"/20g15daemon
+
+	if use perl; then
+		ebegin "Installing Perl Bindings (G15Daemon.pm)"
+		cd "${WORKDIR}/G15Daemon-0.2"
+		docinto perl
+		perl-module_src_install
+	fi
+
+	if use python; then
+		ebegin "Installing Python Bindings (g15daemon.py)"
+		cd "${WORKDIR}/pyg15daemon"
+
+		python_foreach_impl python_domodule g15daemon.py
+
+		docinto python
+		dodoc AUTHORS
+	fi
+}
+
+pkg_postinst() {
+	elog "To use g15daemon, you need to add g15daemon to the default runlevel."
+	elog "This can be done with:"
+	elog "# /sbin/rc-update add g15daemon default"
+	elog "You can edit some g15daemon options at /etc/conf.d/g15daemon"
+	elog ""
+	elog "To have all new keys working in X11, you'll need create a "
+	elog "specific xmodmap in your home directory or edit the existent one."
+	elog ""
+	elog "Create the xmodmap:"
+	elog "cp /usr/share/g15daemon/contrib/xmodmaprc ~/.Xmodmap"
+	elog ""
+	elog "Adding keycodes to an existing xmodmap:"
+	elog "cat /usr/share/g15daemon/contrib/xmodmaprc >> ~/.Xmodmap"
+}
diff --git a/app-misc/g15daemon/g15daemon-1.9.5.3-r21.ebuild b/app-misc/g15daemon/g15daemon-1.9.5.3-r21.ebuild
new file mode 100644
index 000000000000..9149ee0898e8
--- /dev/null
+++ b/app-misc/g15daemon/g15daemon-1.9.5.3-r21.ebuild
@@ -0,0 +1,163 @@
+# Copyright 1999-2016 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+EAPI=5
+
+PYTHON_COMPAT=( python2_7 )
+GENTOO_DEPEND_ON_PERL="no"
+
+inherit eutils linux-info perl-module python-r1 base
+
+DESCRIPTION="G15daemon takes control of the G15 keyboard, through the linux kernel uinput device driver"
+HOMEPAGE="http://g15daemon.sourceforge.net/"
+SRC_URI="mirror://sourceforge/${PN}/${P}.tar.gz"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS=""
+IUSE="perl python static-libs"
+
+DEPEND="virtual/libusb:0
+	>=dev-libs/libg15-9999
+	>=dev-libs/libg15render-1.2
+	perl? (
+		dev-lang/perl
+		dev-perl/GDGraph
+		>=dev-perl/Inline-0.4
+	)
+	python? ( ${PYTHON_DEPS} )"
+RDEPEND="${DEPEND}"
+REQUIRED_USE="python? ( ${PYTHON_REQUIRED_USE} )"
+
+PATCHES=(
+	"${FILESDIR}/${P}-forgotten-open-mode.patch"
+	"${FILESDIR}/${P}-overflow-fix.patch"
+	"${FILESDIR}/${P}-g510-keys.patch"
+)
+
+uinput_check() {
+	ebegin "Checking for uinput support"
+	local rc=1
+	linux_config_exists && linux_chkconfig_present INPUT_UINPUT
+	rc=$?
+
+	if [[ $rc -ne 0 ]] ; then
+		eerror "To use g15daemon, you need to compile your kernel with uinput support."
+		eerror "Please enable uinput support in your kernel config, found at:"
+		eerror
+		eerror "Device Drivers -> Input Device ... -> Miscellaneous devices -> User level driver support."
+		eerror
+		eerror "Once enabled, you should have the /dev/input/uinput device."
+		eerror "g15daemon will not work without the uinput device."
+	fi
+}
+
+pkg_setup() {
+	linux-info_pkg_setup
+	uinput_check
+}
+
+src_unpack() {
+	unpack ${A}
+	if use perl; then
+		unpack "./${P}/lang-bindings/perl-G15Daemon-0.2.tar.gz"
+	fi
+	if use python; then
+		unpack "./${P}/lang-bindings/pyg15daemon-0.0.tar.bz2"
+	fi
+}
+
+src_prepare() {
+	if use perl; then
+		perl-module_src_prepare
+		sed -i \
+			-e '1i#!/usr/bin/perl' \
+			"${S}"/contrib/testbindings.pl
+	else
+		# perl-module_src_prepare always calls base_src_prepare
+		base_src_prepare
+	fi
+}
+
+src_configure() {
+	econf \
+		--docdir="${EPREFIX}/usr/share/doc/${PF}" \
+		$(use_enable static-libs static)
+
+	if use perl; then
+		cd "${WORKDIR}/G15Daemon-0.2"
+		perl-module_src_configure
+	fi
+}
+
+src_compile() {
+	default
+
+	if use perl; then
+		cd "${WORKDIR}/G15Daemon-0.2"
+		perl-module_src_compile
+	fi
+}
+
+src_install() {
+	default
+
+	find "${ED}" -name '*.la' -exec rm -f {} +
+
+	# remove odd docs installed my make
+	rm "${ED}/usr/share/doc/${PF}/"{LICENSE,README.usage}
+
+	insinto /usr/share/${PN}/contrib
+	doins contrib/xmodmaprc
+	doins contrib/xmodmap.sh
+	if use perl; then
+		doins contrib/testbindings.pl
+	fi
+
+	newconfd "${FILESDIR}/${PN}-1.2.7.confd" ${PN}
+	newinitd "${FILESDIR}/${PN}-1.9.5.3.initd" ${PN}
+	dobin "${FILESDIR}/g15daemon-hotplug"
+	insinto /lib/udev/rules.d
+	doins "${FILESDIR}/99-g15daemon.rules"
+
+	insinto /etc
+	doins "${FILESDIR}"/g15daemon.conf
+
+	# Gentoo bug #301340, debian bug #611649
+	exeinto /usr/lib/pm-utils/sleep.d
+	doexe "${FILESDIR}"/20g15daemon
+
+	if use perl; then
+		ebegin "Installing Perl Bindings (G15Daemon.pm)"
+		cd "${WORKDIR}/G15Daemon-0.2"
+		docinto perl
+		perl-module_src_install
+	fi
+
+	if use python; then
+		ebegin "Installing Python Bindings (g15daemon.py)"
+		cd "${WORKDIR}/pyg15daemon"
+
+		python_foreach_impl python_domodule g15daemon.py
+
+		docinto python
+		dodoc AUTHORS
+	fi
+}
+
+pkg_postinst() {
+	elog "To use g15daemon, you need to add g15daemon to the default runlevel."
+	elog "This can be done with:"
+	elog "# /sbin/rc-update add g15daemon default"
+	elog "You can edit some g15daemon options at /etc/conf.d/g15daemon"
+	elog ""
+	elog "To have all new keys working in X11, you'll need create a "
+	elog "specific xmodmap in your home directory or edit the existent one."
+	elog ""
+	elog "Create the xmodmap:"
+	elog "cp /usr/share/g15daemon/contrib/xmodmaprc ~/.Xmodmap"
+	elog ""
+	elog "Adding keycodes to an existing xmodmap:"
+	elog "cat /usr/share/g15daemon/contrib/xmodmaprc >> ~/.Xmodmap"
+}
diff --git a/app-misc/g15daemon/g15daemon-9999.ebuild b/app-misc/g15daemon/g15daemon-9999.ebuild
index e88188462f62..48d76e3efbe1 100644
--- a/app-misc/g15daemon/g15daemon-9999.ebuild
+++ b/app-misc/g15daemon/g15daemon-9999.ebuild
@@ -1,15 +1,15 @@
-# Copyright 1999-2014 Gentoo Foundation
+# Copyright 1999-2016 Gentoo Foundation
 # Distributed under the terms of the GNU General Public License v2
 # $Id$
 
 EAPI=5
+
+PYTHON_COMPAT=( python2_7 )
 GENTOO_DEPEND_ON_PERL="no"
-PYTHON_DEPEND="python? *"
-SUPPORT_PYTHON_ABIS="1"
 ESVN_PROJECT=${PN}/trunk
 ESVN_REPO_URI="https://${PN}.svn.sourceforge.net/svnroot/${ESVN_PROJECT}/${PN}-wip"
 
-inherit eutils linux-info perl-module python base subversion autotools
+inherit eutils linux-info perl-module python-r1 base subversion autotools
 
 DESCRIPTION="G15daemon takes control of the G15 keyboard, through the linux kernel uinput device driver"
 HOMEPAGE="http://g15daemon.sourceforge.net/"
@@ -27,8 +27,10 @@ DEPEND="virtual/libusb:0
 		dev-lang/perl
 		dev-perl/GDGraph
 		>=dev-perl/Inline-0.4
-	)"
+	)
+	python? ( ${PYTHON_DEPS} )"
 RDEPEND="${DEPEND}"
+REQUIRED_USE="python? ( ${PYTHON_REQUIRED_USE} )"
 
 PATCHES=(
 	"${FILESDIR}/${PN}-1.9.5.3-g510-keys.patch"
@@ -56,9 +58,6 @@ uinput_check() {
 pkg_setup() {
 	linux-info_pkg_setup
 	uinput_check
-	if use python; then
-		python_pkg_setup
-	fi
 }
 
 src_unpack() {
@@ -152,11 +151,7 @@ src_install() {
 		ebegin "Installing Python Bindings (g15daemon.py)"
 		cd "${WORKDIR}/pyg15daemon"
 
-		installation() {
-			insinto $(python_get_sitedir)
-			doins g15daemon.py
-		}
-		python_execute_function installation
+		python_foreach_impl python_domodule g15daemon.py
 
 		docinto python
 		dodoc AUTHORS
@@ -164,11 +159,6 @@ src_install() {
 }
 
 pkg_postinst() {
-	if use python; then
-		python_mod_optimize g15daemon.py
-		echo ""
-	fi
-
 	elog "To use g15daemon, you need to add g15daemon to the default runlevel."
 	elog "This can be done with:"
 	elog "# /sbin/rc-update add g15daemon default"
@@ -183,9 +173,3 @@ pkg_postinst() {
 	elog "Adding keycodes to an existing xmodmap:"
 	elog "cat /usr/share/g15daemon/contrib/xmodmaprc >> ~/.Xmodmap"
 }
-
-pkg_postrm() {
-	if use python; then
-		python_mod_cleanup g15daemon.py
-	fi
-}