initial ebuild #28202

5 files changed, 110 insertions, 0 deletions

diff --git a/dev-libs/openct/ChangeLog b/dev-libs/openct/ChangeLog
new file mode 100644
index 000000000000..959ff7979e47
--- /dev/null
+++ b/dev-libs/openct/ChangeLog
@@ -0,0 +1,8 @@
+# ChangeLog for dev-libs/openct
+# Copyright 2000-2004 Gentoo Technologies, Inc.; Distributed under the GPL v2
+# $Header: /var/cvsroot/gentoo-x86/dev-libs/openct/ChangeLog,v 1.1 2004/02/22 07:16:42 vapier Exp $
+
+*openct-0.5.0 (22 Feb 2004)
+
+  22 Feb 2004; Mike Frysinger <vapier@gentoo.org> :
+  Initial import.  Ebuild submitted by Lars T. Mikkelsen/Peter Stuge #28202.
diff --git a/dev-libs/openct/files/digest-openct-0.5.0 b/dev-libs/openct/files/digest-openct-0.5.0
new file mode 100644
index 000000000000..944bb76490df
--- /dev/null
+++ b/dev-libs/openct/files/digest-openct-0.5.0
@@ -0,0 +1 @@
+MD5 5e6de721d22db8f5da060a1843bb3259 openct-0.5.0.tar.gz 417742
diff --git a/dev-libs/openct/files/openct.rc b/dev-libs/openct/files/openct.rc
new file mode 100644
index 000000000000..2325e86e98fa
--- /dev/null
+++ b/dev-libs/openct/files/openct.rc
@@ -0,0 +1,30 @@
+#!/sbin/runscript
+# Copyright 1999-2004 Gentoo Technologies, Inc.
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/dev-libs/openct/files/openct.rc,v 1.1 2004/02/22 07:16:42 vapier Exp $
+
+depend() {
+	need localmount
+}
+
+checkconfig() {
+	if [ ! -e /etc/openct.conf ] ; then
+		eerror "You need an /etc/openct.conf file to run OpenCT"
+		return 1
+	fi
+	return 0
+}
+
+start() {
+	checkconfig || return 1
+
+	ebegin "Starting OpenCT"
+	/usr/sbin/openct-control init
+	eend $?
+}
+
+stop() {
+	ebegin "Stopping OpenCT"
+	/usr/sbin/openct-control shutdown
+	eend $?
+}
diff --git a/dev-libs/openct/files/usb.usermap b/dev-libs/openct/files/usb.usermap
new file mode 100644
index 000000000000..bff916a1a43c
--- /dev/null
+++ b/dev-libs/openct/files/usb.usermap
@@ -0,0 +1,6 @@
+openct               0x0003 0x0973   0x0001    0x0000       0x0001       0xff         0x00            0x00            0xff            0x00            0x00            0x00000000
+openct               0x0003 0x0529   0x050c    0x0000       0x0001       0xff         0x00            0x00            0xff            0x00            0x00            0x00000000
+openct               0x0003 0x0529   0x0514    0x0000       0x0001       0xff         0x00            0x00            0xff            0x00            0x00            0x00000000
+openct               0x0003 0x073d   0x0005    0x0000       0x0001       0xff         0x00            0x00            0xff            0x00            0x00            0x00000000
+openct               0x0003 0x04b9   0x1300    0x0000       0x0001       0xff         0x00            0x00            0xff            0x00            0x00            0x00000000
+openct               0x0003 0x076b   0x0596    0x0000       0x0001       0xff         0x00            0x00            0xff            0x00            0x00            0x00000000
diff --git a/dev-libs/openct/openct-0.5.0.ebuild b/dev-libs/openct/openct-0.5.0.ebuild
new file mode 100644
index 000000000000..77782a49cbb3
--- /dev/null
+++ b/dev-libs/openct/openct-0.5.0.ebuild
@@ -0,0 +1,65 @@
+# Copyright 1999-2004 Gentoo Technologies, Inc.
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/dev-libs/openct/openct-0.5.0.ebuild,v 1.1 2004/02/22 07:16:42 vapier Exp $
+
+inherit eutils
+
+DESCRIPTION="OpenCT is a library for accessing smart card terminals."
+HOMEPAGE="http://opensc.org/"
+SRC_URI="http://opensc.org/files/${P}.tar.gz"
+
+LICENSE="BSD"
+SLOT="0"
+KEYWORDS="~x86"
+IUSE="usb"
+
+RDEPEND="virtual/glibc
+	usb? (	>=dev-libs/libusb-0.1.7
+		>=sys-apps/hotplug-20030805-r1 )"
+DEPEND="${RDEPEND}
+	>=sys-apps/sed-4.0.7"
+
+pkg_setup() {
+	enewgroup openct
+}
+
+src_compile() {
+	econf --localstatedir=/var || die
+	emake || die
+}
+
+src_install() {
+	make DESTDIR=${D} install || die
+
+	insinto /etc
+	doins etc/openct.conf || die
+	if use usb ; then
+		insinto /etc/hotplug/usb
+		doins etc/openct.usermap || die
+		exeinto /etc/hotplug/usb
+		newexe etc/hotplug.openct openct || die
+	fi
+
+	exeinto /etc/init.d
+	newexe ${FILESDIR}/openct.rc openct || die
+
+	diropts -m0750 -gopenct
+	dodir /var/run/openct
+
+	dodoc ANNOUNCE AUTHORS NEWS README TODO
+	dohtml doc/openct.{html,css}
+}
+
+pkg_postinst() {
+	einfo "You need to edit /etc/openct.conf to enable serial readers."
+	einfo
+	einfo "To use hotplugging (USB readers) your kernel has to be compiled"
+	einfo "with CONFIG_HOTPLUG enabled and sys-apps/hotplug must be emerged."
+	einfo
+	einfo "You should add \"openct\" to your default runlevel. To do so"
+	einfo "type \"rc-update add openct default\"."
+	einfo
+	einfo "You need to be a member of the (newly created) group openct to"
+	einfo "access smart card readers connected to this system. Set users'"
+	einfo "groups with usermod -G.  root always has access."
+}