path: root/openvz-sources/022.078/5122_linux-2.6.15-dcdbas-5.6.0-1.patch

--- ./Documentation/dcdbas.txt.dcd	2006-02-02 17:20:43.000000000 +0300
+++ ./Documentation/dcdbas.txt	2006-02-02 17:20:51.000000000 +0300
@@ -0,0 +1,91 @@
+Overview
+
+The Dell Systems Management Base Driver provides a sysfs interface for
+systems management software such as Dell OpenManage to perform system
+management interrupts and host control actions (system power cycle or
+power off after OS shutdown) on certain Dell systems.
+
+Dell OpenManage requires this driver on the following Dell PowerEdge systems:
+300, 1300, 1400, 400SC, 500SC, 1500SC, 1550, 600SC, 1600SC, 650, 1655MC,
+700, and 750.  Other Dell software such as the open source libsmbios project
+is expected to make use of this driver, and it may include the use of this
+driver on other Dell systems.
+
+The Dell libsmbios project aims towards providing access to as much BIOS
+information as possible.  See http://linux.dell.com/libsmbios/main/ for
+more information about the libsmbios project.
+
+
+System Management Interrupt
+
+On some Dell systems, systems management software must access certain
+management information via a system management interrupt (SMI).  The SMI data
+buffer must reside in 32-bit address space, and the physical address of the
+buffer is required for the SMI.  The driver maintains the memory required for
+the SMI and provides a way for the application to generate the SMI.
+The driver creates the following sysfs entries for systems management
+software to perform these system management interrupts:
+
+/sys/devices/platform/dcdbas/smi_data
+/sys/devices/platform/dcdbas/smi_data_buf_phys_addr
+/sys/devices/platform/dcdbas/smi_data_buf_size
+/sys/devices/platform/dcdbas/smi_request
+
+Systems management software must perform the following steps to execute
+a SMI using this driver:
+
+1) Lock smi_data.
+2) Write system management command to smi_data.
+3) Write "1" to smi_request to generate a calling interface SMI or
+   "2" to generate a raw SMI.
+4) Read system management command response from smi_data.
+5) Unlock smi_data.
+
+
+Host Control Action
+
+Dell OpenManage supports a host control feature that allows the administrator
+to perform a power cycle or power off of the system after the OS has finished
+shutting down.  On some Dell systems, this host control feature requires that
+a driver perform a SMI after the OS has finished shutting down.
+
+The driver creates the following sysfs entries for systems management software
+to schedule the driver to perform a power cycle or power off host control
+action after the system has finished shutting down:
+
+/sys/devices/platform/dcdbas/host_control_action
+/sys/devices/platform/dcdbas/host_control_smi_type
+/sys/devices/platform/dcdbas/host_control_on_shutdown
+
+Dell OpenManage performs the following steps to execute a power cycle or
+power off host control action using this driver:
+
+1) Write host control action to be performed to host_control_action.
+2) Write type of SMI that driver needs to perform to host_control_smi_type.
+3) Write "1" to host_control_on_shutdown to enable host control action.
+4) Initiate OS shutdown.
+   (Driver will perform host control SMI when it is notified that the OS
+   has finished shutting down.)
+
+
+Host Control SMI Type
+
+The following table shows the value to write to host_control_smi_type to
+perform a power cycle or power off host control action:
+
+PowerEdge System    Host Control SMI Type
+----------------    ---------------------
+      300             HC_SMITYPE_TYPE1
+     1300             HC_SMITYPE_TYPE1
+     1400             HC_SMITYPE_TYPE2
+      500SC           HC_SMITYPE_TYPE2
+     1500SC           HC_SMITYPE_TYPE2
+     1550             HC_SMITYPE_TYPE2
+      600SC           HC_SMITYPE_TYPE2
+     1600SC           HC_SMITYPE_TYPE2
+      650             HC_SMITYPE_TYPE2
+     1655MC           HC_SMITYPE_TYPE2
+      700             HC_SMITYPE_TYPE3
+      750             HC_SMITYPE_TYPE3
+
+
--- ./drivers/firmware/dcdbas.c.dcd	2006-02-02 17:18:22.000000000 +0300
+++ ./drivers/firmware/dcdbas.c	2006-02-02 18:03:20.000000000 +0300
@@ -0,0 +1,586 @@
+/*
+ *  dcdbas.c: Dell Systems Management Base Driver
+ *
+ *  The Dell Systems Management Base Driver provides a sysfs interface for
+ *  systems management software to perform System Management Interrupts (SMIs)
+ *  and Host Control Actions (power cycle or power off after OS shutdown) on
+ *  Dell systems.
+ *
+ *  See Documentation/dcdbas.txt for more information.
+ *
+ *  Copyright (C) 1995-2005 Dell Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License v2.0 as published by
+ *  the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mc146818rtc.h>
+#include <linux/module.h>
+#include <linux/reboot.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <asm/io.h>
+#include <asm/semaphore.h>
+
+#include "dcdbas.h"
+
+#define DRIVER_NAME		"dcdbas"
+#define DRIVER_VERSION		"5.6.0-1"
+#define DRIVER_DESCRIPTION	"Dell Systems Management Base Driver"
+
+static struct platform_device *dcdbas_pdev;
+
+static u8 *smi_data_buf;
+static dma_addr_t smi_data_buf_handle;
+static unsigned long smi_data_buf_size;
+static u32 smi_data_buf_phys_addr;
+static DECLARE_MUTEX(smi_data_lock);
+
+static unsigned int host_control_action;
+static unsigned int host_control_smi_type;
+static unsigned int host_control_on_shutdown;
+
+/**
+ * smi_data_buf_free: free SMI data buffer
+ */
+static void smi_data_buf_free(void)
+{
+	if (!smi_data_buf)
+		return;
+
+	dev_dbg(&dcdbas_pdev->dev, "%s: phys: %x size: %lu\n",
+		__FUNCTION__, smi_data_buf_phys_addr, smi_data_buf_size);
+
+	dma_free_coherent(&dcdbas_pdev->dev, smi_data_buf_size, smi_data_buf,
+			  smi_data_buf_handle);
+	smi_data_buf = NULL;
+	smi_data_buf_handle = 0;
+	smi_data_buf_phys_addr = 0;
+	smi_data_buf_size = 0;
+}
+
+/**
+ * smi_data_buf_realloc: grow SMI data buffer if needed
+ */
+static int smi_data_buf_realloc(unsigned long size)
+{
+	void *buf;
+	dma_addr_t handle;
+
+	if (smi_data_buf_size >= size)
+		return 0;
+
+	if (size > MAX_SMI_DATA_BUF_SIZE)
+		return -EINVAL;
+
+	/* new buffer is needed */
+	buf = dma_alloc_coherent(&dcdbas_pdev->dev, size, &handle, GFP_KERNEL);
+	if (!buf) {
+		dev_dbg(&dcdbas_pdev->dev,
+			"%s: failed to allocate memory size %lu\n",
+			__FUNCTION__, size);
+		return -ENOMEM;
+	}
+	/* memory zeroed by dma_alloc_coherent */
+
+	if (smi_data_buf)
+		memcpy(buf, smi_data_buf, smi_data_buf_size);
+
+	/* free any existing buffer */
+	smi_data_buf_free();
+
+	/* set up new buffer for use */
+	smi_data_buf = buf;
+	smi_data_buf_handle = handle;
+	smi_data_buf_phys_addr = (u32) virt_to_phys(buf);
+	smi_data_buf_size = size;
+
+	dev_dbg(&dcdbas_pdev->dev, "%s: phys: %x size: %lu\n",
+		__FUNCTION__, smi_data_buf_phys_addr, smi_data_buf_size);
+
+	return 0;
+}
+
+static ssize_t smi_data_buf_phys_addr_show(struct device *dev,
+					   char *buf)
+{
+	return sprintf(buf, "%x\n", smi_data_buf_phys_addr);
+}
+
+static ssize_t smi_data_buf_size_show(struct device *dev,
+				      char *buf)
+{
+	return sprintf(buf, "%lu\n", smi_data_buf_size);
+}
+
+static ssize_t smi_data_buf_size_store(struct device *dev,
+				       const char *buf, size_t count)
+{
+	unsigned long buf_size;
+	ssize_t ret;
+
+	buf_size = simple_strtoul(buf, NULL, 10);
+
+	/* make sure SMI data buffer is at least buf_size */
+	down(&smi_data_lock);
+	ret = smi_data_buf_realloc(buf_size);
+	up(&smi_data_lock);
+	if (ret)
+		return ret;
+
+	return count;
+}
+
+static ssize_t smi_data_read(struct kobject *kobj, char *buf, loff_t pos,
+			     size_t count)
+{
+	size_t max_read;
+	ssize_t ret;
+
+	down(&smi_data_lock);
+
+	if (pos >= smi_data_buf_size) {
+		ret = 0;
+		goto out;
+	}
+
+	max_read = smi_data_buf_size - pos;
+	ret = min(max_read, count);
+	memcpy(buf, smi_data_buf + pos, ret);
+out:
+	up(&smi_data_lock);
+	return ret;
+}
+
+static ssize_t smi_data_write(struct kobject *kobj, char *buf, loff_t pos,
+			      size_t count)
+{
+	ssize_t ret;
+
+	down(&smi_data_lock);
+
+	ret = smi_data_buf_realloc(pos + count);
+	if (ret)
+		goto out;
+
+	memcpy(smi_data_buf + pos, buf, count);
+	ret = count;
+out:
+	up(&smi_data_lock);
+	return ret;
+}
+
+static ssize_t host_control_action_show(struct device *dev,
+					char *buf)
+{
+	return sprintf(buf, "%u\n", host_control_action);
+}
+
+static ssize_t host_control_action_store(struct device *dev,
+					 const char *buf, size_t count)
+{
+	ssize_t ret;
+
+	/* make sure buffer is available for host control command */
+	down(&smi_data_lock);
+	ret = smi_data_buf_realloc(sizeof(struct apm_cmd));
+	up(&smi_data_lock);
+	if (ret)
+		return ret;
+
+	host_control_action = simple_strtoul(buf, NULL, 10);
+	return count;
+}
+
+static ssize_t host_control_smi_type_show(struct device *dev,
+					  char *buf)
+{
+	return sprintf(buf, "%u\n", host_control_smi_type);
+}
+
+static ssize_t host_control_smi_type_store(struct device *dev,
+					   const char *buf, size_t count)
+{
+	host_control_smi_type = simple_strtoul(buf, NULL, 10);
+	return count;
+}
+
+static ssize_t host_control_on_shutdown_show(struct device *dev,
+					     char *buf)
+{
+	return sprintf(buf, "%u\n", host_control_on_shutdown);
+}
+
+static ssize_t host_control_on_shutdown_store(struct device *dev,
+					      const char *buf, size_t count)
+{
+	host_control_on_shutdown = simple_strtoul(buf, NULL, 10);
+	return count;
+}
+
+/**
+ * smi_request: generate SMI request
+ *
+ * Called with smi_data_lock.
+ */
+static int smi_request(struct smi_cmd *smi_cmd)
+{
+	cpumask_t old_mask;
+	int ret = 0;
+
+	if (smi_cmd->magic != SMI_CMD_MAGIC) {
+		dev_info(&dcdbas_pdev->dev, "%s: invalid magic value\n",
+			 __FUNCTION__);
+		return -EBADR;
+	}
+
+	/* SMI requires CPU 0 */
+	old_mask = current->cpus_allowed;
+	set_cpus_allowed(current, cpumask_of_cpu(0));
+	if (smp_processor_id() != 0) {
+		dev_dbg(&dcdbas_pdev->dev, "%s: failed to get CPU 0\n",
+			__FUNCTION__);
+		ret = -EBUSY;
+		goto out;
+	}
+
+	/* generate SMI */
+	asm volatile (
+		"outb %b0,%w1"
+		: /* no output args */
+		: "a" (smi_cmd->command_code),
+		  "d" (smi_cmd->command_address),
+		  "b" (smi_cmd->ebx),
+		  "c" (smi_cmd->ecx)
+		: "memory"
+	);
+
+out:
+	set_cpus_allowed(current, old_mask);
+	return ret;
+}
+
+/**
+ * smi_request_store:
+ *
+ * The valid values are:
+ * 0: zero SMI data buffer
+ * 1: generate calling interface SMI
+ * 2: generate raw SMI
+ *
+ * User application writes smi_cmd to smi_data before telling driver
+ * to generate SMI.
+ */
+static ssize_t smi_request_store(struct device *dev,
+				 const char *buf, size_t count)
+{
+	struct smi_cmd *smi_cmd;
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+	ssize_t ret;
+
+	down(&smi_data_lock);
+
+	if (smi_data_buf_size < sizeof(struct smi_cmd)) {
+		ret = -ENODEV;
+		goto out;
+	}
+	smi_cmd = (struct smi_cmd *)smi_data_buf;
+
+	switch (val) {
+	case 2:
+		/* Raw SMI */
+		ret = smi_request(smi_cmd);
+		if (!ret)
+			ret = count;
+		break;
+	case 1:
+		/* Calling Interface SMI */
+		smi_cmd->ebx = (u32) virt_to_phys(smi_cmd->command_buffer);
+		ret = smi_request(smi_cmd);
+		if (!ret)
+			ret = count;
+		break;
+	case 0:
+		memset(smi_data_buf, 0, smi_data_buf_size);
+		ret = count;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+out:
+	up(&smi_data_lock);
+	return ret;
+}
+
+/**
+ * host_control_smi: generate host control SMI
+ *
+ * Caller must set up the host control command in smi_data_buf.
+ */
+static int host_control_smi(void)
+{
+	struct apm_cmd *apm_cmd;
+	u8 *data;
+	unsigned long flags;
+	u32 num_ticks;
+	s8 cmd_status;
+	u8 index;
+
+	apm_cmd = (struct apm_cmd *)smi_data_buf;
+	apm_cmd->status = ESM_STATUS_CMD_UNSUCCESSFUL;
+
+	switch (host_control_smi_type) {
+	case HC_SMITYPE_TYPE1:
+		spin_lock_irqsave(&rtc_lock, flags);
+		/* write SMI data buffer physical address */
+		data = (u8 *)&smi_data_buf_phys_addr;
+		for (index = PE1300_CMOS_CMD_STRUCT_PTR;
+		     index < (PE1300_CMOS_CMD_STRUCT_PTR + 4);
+		     index++, data++) {
+			outb(index,
+			     (CMOS_BASE_PORT + CMOS_PAGE2_INDEX_PORT_PIIX4));
+			outb(*data,
+			     (CMOS_BASE_PORT + CMOS_PAGE2_DATA_PORT_PIIX4));
+		}
+
+		/* first set status to -1 as called by spec */
+		cmd_status = ESM_STATUS_CMD_UNSUCCESSFUL;
+		outb((u8) cmd_status, PCAT_APM_STATUS_PORT);
+
+		/* generate SMM call */
+		outb(ESM_APM_CMD, PCAT_APM_CONTROL_PORT);
+		spin_unlock_irqrestore(&rtc_lock, flags);
+
+		/* wait a few to see if it executed */
+		num_ticks = TIMEOUT_USEC_SHORT_SEMA_BLOCKING;
+		while ((cmd_status = inb(PCAT_APM_STATUS_PORT))
+		       == ESM_STATUS_CMD_UNSUCCESSFUL) {
+			num_ticks--;
+			if (num_ticks == EXPIRED_TIMER)
+				return -ETIME;
+		}
+		break;
+
+	case HC_SMITYPE_TYPE2:
+	case HC_SMITYPE_TYPE3:
+		spin_lock_irqsave(&rtc_lock, flags);
+		/* write SMI data buffer physical address */
+		data = (u8 *)&smi_data_buf_phys_addr;
+		for (index = PE1400_CMOS_CMD_STRUCT_PTR;
+		     index < (PE1400_CMOS_CMD_STRUCT_PTR + 4);
+		     index++, data++) {
+			outb(index, (CMOS_BASE_PORT + CMOS_PAGE1_INDEX_PORT));
+			outb(*data, (CMOS_BASE_PORT + CMOS_PAGE1_DATA_PORT));
+		}
+
+		/* generate SMM call */
+		if (host_control_smi_type == HC_SMITYPE_TYPE3)
+			outb(ESM_APM_CMD, PCAT_APM_CONTROL_PORT);
+		else
+			outb(ESM_APM_CMD, PE1400_APM_CONTROL_PORT);
+
+		/* restore RTC index pointer since it was written to above */
+		CMOS_READ(RTC_REG_C);
+		spin_unlock_irqrestore(&rtc_lock, flags);
+
+		/* read control port back to serialize write */
+		cmd_status = inb(PE1400_APM_CONTROL_PORT);
+
+		/* wait a few to see if it executed */
+		num_ticks = TIMEOUT_USEC_SHORT_SEMA_BLOCKING;
+		while (apm_cmd->status == ESM_STATUS_CMD_UNSUCCESSFUL) {
+			num_ticks--;
+			if (num_ticks == EXPIRED_TIMER)
+				return -ETIME;
+		}
+		break;
+
+	default:
+		dev_dbg(&dcdbas_pdev->dev, "%s: invalid SMI type %u\n",
+			__FUNCTION__, host_control_smi_type);
+		return -ENOSYS;
+	}
+
+	return 0;
+}
+
+/**
+ * dcdbas_host_control: initiate host control
+ *
+ * This function is called by the driver after the system has
+ * finished shutting down if the user application specified a
+ * host control action to perform on shutdown.  It is safe to
+ * use smi_data_buf at this point because the system has finished
+ * shutting down and no userspace apps are running.
+ */
+static void dcdbas_host_control(void)
+{
+	struct apm_cmd *apm_cmd;
+	u8 action;
+
+	if (host_control_action == HC_ACTION_NONE)
+		return;
+
+	action = host_control_action;
+	host_control_action = HC_ACTION_NONE;
+
+	if (!smi_data_buf) {
+		dev_dbg(&dcdbas_pdev->dev, "%s: no SMI buffer\n", __FUNCTION__);
+		return;
+	}
+
+	if (smi_data_buf_size < sizeof(struct apm_cmd)) {
+		dev_dbg(&dcdbas_pdev->dev, "%s: SMI buffer too small\n",
+			__FUNCTION__);
+		return;
+	}
+
+	apm_cmd = (struct apm_cmd *)smi_data_buf;
+
+	/* power off takes precedence */
+	if (action & HC_ACTION_HOST_CONTROL_POWEROFF) {
+		apm_cmd->command = ESM_APM_POWER_CYCLE;
+		apm_cmd->reserved = 0;
+		*((s16 *)&apm_cmd->parameters.shortreq.parm[0]) = (s16) 0;
+		host_control_smi();
+	} else if (action & HC_ACTION_HOST_CONTROL_POWERCYCLE) {
+		apm_cmd->command = ESM_APM_POWER_CYCLE;
+		apm_cmd->reserved = 0;
+		*((s16 *)&apm_cmd->parameters.shortreq.parm[0]) = (s16) 20;
+		host_control_smi();
+	}
+}
+
+/**
+ * dcdbas_reboot_notify: handle reboot notification for host control
+ */
+static int dcdbas_reboot_notify(struct notifier_block *nb, unsigned long code,
+				void *unused)
+{
+	static unsigned int notify_cnt = 0;
+
+	switch (code) {
+	case SYS_DOWN:
+	case SYS_HALT:
+	case SYS_POWER_OFF:
+		if (host_control_on_shutdown) {
+			/* firmware is going to perform host control action */
+			if (++notify_cnt == 2) {
+				printk(KERN_WARNING
+				       "Please wait for shutdown "
+				       "action to complete...\n");
+				dcdbas_host_control();
+			}
+			/*
+			 * register again and initiate the host control
+			 * action on the second notification to allow
+			 * everyone that registered to be notified
+			 */
+			register_reboot_notifier(nb);
+		}
+		break;
+	}
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block dcdbas_reboot_nb = {
+	.notifier_call = dcdbas_reboot_notify,
+	.next = NULL,
+	.priority = 0
+};
+
+static DCDBAS_BIN_ATTR_RW(smi_data);
+
+static struct bin_attribute *dcdbas_bin_attrs[] = {
+	&bin_attr_smi_data,
+	NULL
+};
+
+static DCDBAS_DEV_ATTR_RW(smi_data_buf_size);
+static DCDBAS_DEV_ATTR_RO(smi_data_buf_phys_addr);
+static DCDBAS_DEV_ATTR_WO(smi_request);
+static DCDBAS_DEV_ATTR_RW(host_control_action);
+static DCDBAS_DEV_ATTR_RW(host_control_smi_type);
+static DCDBAS_DEV_ATTR_RW(host_control_on_shutdown);
+
+static struct device_attribute *dcdbas_dev_attrs[] = {
+	&dev_attr_smi_data_buf_size,
+	&dev_attr_smi_data_buf_phys_addr,
+	&dev_attr_smi_request,
+	&dev_attr_host_control_action,
+	&dev_attr_host_control_smi_type,
+	&dev_attr_host_control_on_shutdown,
+	NULL
+};
+
+/**
+ * dcdbas_init: initialize driver
+ */
+static int __init dcdbas_init(void)
+{
+	int i;
+
+	host_control_action = HC_ACTION_NONE;
+	host_control_smi_type = HC_SMITYPE_NONE;
+
+	dcdbas_pdev = platform_device_register_simple(DRIVER_NAME, -1, NULL, 0);
+	if (IS_ERR(dcdbas_pdev))
+		return PTR_ERR(dcdbas_pdev);
+
+	/*
+	 * BIOS SMI calls require buffer addresses be in 32-bit address space.
+	 * This is done by setting the DMA mask below.
+	 */
+	dcdbas_pdev->dev.coherent_dma_mask = DMA_32BIT_MASK;
+	dcdbas_pdev->dev.dma_mask = &dcdbas_pdev->dev.coherent_dma_mask;
+
+	register_reboot_notifier(&dcdbas_reboot_nb);
+
+	for (i = 0; dcdbas_bin_attrs[i]; i++)
+		sysfs_create_bin_file(&dcdbas_pdev->dev.kobj,
+				      dcdbas_bin_attrs[i]);
+
+	for (i = 0; dcdbas_dev_attrs[i]; i++)
+		device_create_file(&dcdbas_pdev->dev, dcdbas_dev_attrs[i]);
+
+	dev_info(&dcdbas_pdev->dev, "%s (version %s)\n",
+		 DRIVER_DESCRIPTION, DRIVER_VERSION);
+
+	return 0;
+}
+
+/**
+ * dcdbas_exit: perform driver cleanup
+ */
+static void __exit dcdbas_exit(void)
+{
+	platform_device_unregister(dcdbas_pdev);
+	unregister_reboot_notifier(&dcdbas_reboot_nb);
+	smi_data_buf_free();
+}
+
+module_init(dcdbas_init);
+module_exit(dcdbas_exit);
+
+MODULE_DESCRIPTION(DRIVER_DESCRIPTION " (version " DRIVER_VERSION ")");
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_AUTHOR("Dell Inc.");
+MODULE_LICENSE("GPL");
+
--- ./drivers/firmware/dcdbas.h.dcd	2006-02-02 17:18:29.000000000 +0300
+++ ./drivers/firmware/dcdbas.h	2006-02-02 17:20:02.000000000 +0300
@@ -0,0 +1,107 @@
+/*
+ *  dcdbas.h: Definitions for Dell Systems Management Base driver
+ *
+ *  Copyright (C) 1995-2005 Dell Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License v2.0 as published by
+ *  the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#ifndef _DCDBAS_H_
+#define _DCDBAS_H_
+
+#include <linux/device.h>
+#include <linux/input.h>
+#include <linux/sysfs.h>
+#include <linux/types.h>
+
+#define MAX_SMI_DATA_BUF_SIZE			(256 * 1024)
+
+#define HC_ACTION_NONE				(0)
+#define HC_ACTION_HOST_CONTROL_POWEROFF		BIT(1)
+#define HC_ACTION_HOST_CONTROL_POWERCYCLE	BIT(2)
+
+#define HC_SMITYPE_NONE				(0)
+#define HC_SMITYPE_TYPE1			(1)
+#define HC_SMITYPE_TYPE2			(2)
+#define HC_SMITYPE_TYPE3			(3)
+
+#define ESM_APM_CMD				(0x0A0)
+#define ESM_APM_POWER_CYCLE			(0x10)
+#define ESM_STATUS_CMD_UNSUCCESSFUL		(-1)
+
+#define CMOS_BASE_PORT				(0x070)
+#define CMOS_PAGE1_INDEX_PORT			(0)
+#define CMOS_PAGE1_DATA_PORT			(1)
+#define CMOS_PAGE2_INDEX_PORT_PIIX4		(2)
+#define CMOS_PAGE2_DATA_PORT_PIIX4		(3)
+#define PE1400_APM_CONTROL_PORT			(0x0B0)
+#define PCAT_APM_CONTROL_PORT			(0x0B2)
+#define PCAT_APM_STATUS_PORT			(0x0B3)
+#define PE1300_CMOS_CMD_STRUCT_PTR		(0x38)
+#define PE1400_CMOS_CMD_STRUCT_PTR		(0x70)
+
+#define MAX_SYSMGMT_SHORTCMD_PARMBUF_LEN	(14)
+#define MAX_SYSMGMT_LONGCMD_SGENTRY_NUM		(16)
+
+#define TIMEOUT_USEC_SHORT_SEMA_BLOCKING	(10000)
+#define EXPIRED_TIMER				(0)
+
+#define SMI_CMD_MAGIC				(0x534D4931)
+
+#define DCDBAS_DEV_ATTR_RW(_name) \
+	DEVICE_ATTR(_name,0600,_name##_show,_name##_store);
+
+#define DCDBAS_DEV_ATTR_RO(_name) \
+	DEVICE_ATTR(_name,0400,_name##_show,NULL);
+
+#define DCDBAS_DEV_ATTR_WO(_name) \
+	DEVICE_ATTR(_name,0200,NULL,_name##_store);
+
+#define DCDBAS_BIN_ATTR_RW(_name) \
+struct bin_attribute bin_attr_##_name = { \
+	.attr =  { .name = __stringify(_name), \
+		   .mode = 0600, \
+		   .owner = THIS_MODULE }, \
+	.read =  _name##_read, \
+	.write = _name##_write, \
+}
+
+struct smi_cmd {
+	__u32 magic;
+	__u32 ebx;
+	__u32 ecx;
+	__u16 command_address;
+	__u8 command_code;
+	__u8 reserved;
+	__u8 command_buffer[1];
+} __attribute__ ((packed));
+
+struct apm_cmd {
+	__u8 command;
+	__s8 status;
+	__u16 reserved;
+	union {
+		struct {
+			__u8 parm[MAX_SYSMGMT_SHORTCMD_PARMBUF_LEN];
+		} __attribute__ ((packed)) shortreq;
+
+		struct {
+			__u16 num_sg_entries;
+			struct {
+				__u32 size;
+				__u64 addr;
+			} __attribute__ ((packed))
+			    sglist[MAX_SYSMGMT_LONGCMD_SGENTRY_NUM];
+		} __attribute__ ((packed)) longreq;
+	} __attribute__ ((packed)) parameters;
+} __attribute__ ((packed));
+
+#endif /* _DCDBAS_H_ */
+
--- ./drivers/firmware/dell_rbu.c.dcd	2006-02-02 17:18:43.000000000 +0300
+++ ./drivers/firmware/dell_rbu.c	2006-02-02 17:56:24.000000000 +0300
@@ -0,0 +1,763 @@
+/*
+ * dell_rbu.c
+ * Bios Update driver for Dell systems
+ * Author: Dell Inc
+ *         Abhay Salunke <abhay_salunke@dell.com>
+ *
+ * Copyright (C) 2005 Dell Inc.
+ *
+ * Remote BIOS Update (rbu) driver is used for updating DELL BIOS by
+ * creating entries in the /sys file systems on Linux 2.6 and higher
+ * kernels. The driver supports two mechanism to update the BIOS namely
+ * contiguous and packetized. Both these methods still require having some
+ * application to set the CMOS bit indicating the BIOS to update itself
+ * after a reboot.
+ *
+ * Contiguous method:
+ * This driver writes the incoming data in a monolithic image by allocating
+ * contiguous physical pages large enough to accommodate the incoming BIOS
+ * image size.
+ *
+ * Packetized method:
+ * The driver writes the incoming packet image by allocating a new packet
+ * on every time the packet data is written. This driver requires an
+ * application to break the BIOS image in to fixed sized packet chunks.
+ *
+ * See Documentation/dell_rbu.txt for more info.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2.0 as published by
+ * the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/blkdev.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <linux/moduleparam.h>
+#include <linux/firmware.h>
+#include <linux/dma-mapping.h>
+
+MODULE_AUTHOR("Abhay Salunke <abhay_salunke@dell.com>");
+MODULE_DESCRIPTION("Driver for updating BIOS image on DELL systems");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("3.1");
+
+#define BIOS_SCAN_LIMIT 0xffffffff
+#define MAX_IMAGE_LENGTH 16
+static struct _rbu_data {
+	void *image_update_buffer;
+	unsigned long image_update_buffer_size;
+	unsigned long bios_image_size;
+	int image_update_ordernum;
+	int dma_alloc;
+	spinlock_t lock;
+	unsigned long packet_read_count;
+	unsigned long num_packets;
+	unsigned long packetsize;
+	unsigned long imagesize;
+	int entry_created;
+} rbu_data;
+
+static char image_type[MAX_IMAGE_LENGTH + 1] = "mono";
+module_param_string(image_type, image_type, sizeof (image_type), 0);
+MODULE_PARM_DESC(image_type,
+	"BIOS image type. choose- mono or packet or init");
+
+static unsigned long allocation_floor = 0x100000;
+module_param(allocation_floor, ulong, 0644);
+MODULE_PARM_DESC(allocation_floor,
+    "Minimum address for allocations when using Packet mode");
+
+struct packet_data {
+	struct list_head list;
+	size_t length;
+	void *data;
+	int ordernum;
+};
+
+static struct packet_data packet_data_head;
+
+static struct platform_device *rbu_device;
+static int context;
+static dma_addr_t dell_rbu_dmaaddr;
+
+static void init_packet_head(void)
+{
+	INIT_LIST_HEAD(&packet_data_head.list);
+	rbu_data.packet_read_count = 0;
+	rbu_data.num_packets = 0;
+	rbu_data.packetsize = 0;
+	rbu_data.imagesize = 0;
+}
+
+static int create_packet(void *data, size_t length)
+{
+	struct packet_data *newpacket;
+	int ordernum = 0;
+	int retval = 0;
+	unsigned int packet_array_size = 0;
+	void **invalid_addr_packet_array = NULL;
+	void *packet_data_temp_buf = NULL;
+	unsigned int idx = 0;
+
+	pr_debug("create_packet: entry \n");
+
+	if (!rbu_data.packetsize) {
+		pr_debug("create_packet: packetsize not specified\n");
+		retval = -EINVAL;
+		goto out_noalloc;
+	}
+
+	spin_unlock(&rbu_data.lock);
+
+	newpacket = kzalloc(sizeof (struct packet_data), GFP_KERNEL);
+
+	if (!newpacket) {
+		printk(KERN_WARNING
+			"dell_rbu:%s: failed to allocate new "
+			"packet\n", __FUNCTION__);
+		retval = -ENOMEM;
+		spin_lock(&rbu_data.lock);
+		goto out_noalloc;
+	}
+
+	ordernum = get_order(length);
+
+	/*
+	 * BIOS errata mean we cannot allocate packets below 1MB or they will
+	 * be overwritten by BIOS.
+	 *
+	 * array to temporarily hold packets
+	 * that are below the allocation floor
+	 *
+	 * NOTE: very simplistic because we only need the floor to be at 1MB
+	 *       due to BIOS errata. This shouldn't be used for higher floors
+	 *       or you will run out of mem trying to allocate the array.
+	 */
+	packet_array_size = max(
+	       		(unsigned int)(allocation_floor / rbu_data.packetsize),
+			(unsigned int)1);
+	invalid_addr_packet_array = kzalloc(packet_array_size * sizeof(void*),
+						GFP_KERNEL);
+
+	if (!invalid_addr_packet_array) {
+		printk(KERN_WARNING
+			"dell_rbu:%s: failed to allocate "
+			"invalid_addr_packet_array \n",
+			__FUNCTION__);
+		retval = -ENOMEM;
+		spin_lock(&rbu_data.lock);
+		goto out_alloc_packet;
+	}
+
+	while (!packet_data_temp_buf) {
+		packet_data_temp_buf = (unsigned char *)
+			__get_free_pages(GFP_KERNEL, ordernum);
+		if (!packet_data_temp_buf) {
+			printk(KERN_WARNING
+				"dell_rbu:%s: failed to allocate new "
+				"packet\n", __FUNCTION__);
+			retval = -ENOMEM;
+			spin_lock(&rbu_data.lock);
+			goto out_alloc_packet_array;
+		}
+
+		if ((unsigned long)virt_to_phys(packet_data_temp_buf)
+				< allocation_floor) {
+			pr_debug("packet 0x%lx below floor at 0x%lx.\n",
+					(unsigned long)virt_to_phys(
+						packet_data_temp_buf),
+					allocation_floor);
+			invalid_addr_packet_array[idx++] = packet_data_temp_buf;
+			packet_data_temp_buf = NULL;
+		}
+	}
+	spin_lock(&rbu_data.lock);
+
+	newpacket->data = packet_data_temp_buf;
+
+	pr_debug("create_packet: newpacket at physical addr %lx\n",
+		(unsigned long)virt_to_phys(newpacket->data));
+
+	/* packets may not have fixed size */
+	newpacket->length = length;
+	newpacket->ordernum = ordernum;
+	++rbu_data.num_packets;
+
+	/* initialize the newly created packet headers */
+	INIT_LIST_HEAD(&newpacket->list);
+	list_add_tail(&newpacket->list, &packet_data_head.list);
+
+	memcpy(newpacket->data, data, length);
+
+	pr_debug("create_packet: exit \n");
+
+out_alloc_packet_array:
+	/* always free packet array */
+	for (;idx>0;idx--) {
+		pr_debug("freeing unused packet below floor 0x%lx.\n",
+			(unsigned long)virt_to_phys(
+				invalid_addr_packet_array[idx-1]));
+		free_pages((unsigned long)invalid_addr_packet_array[idx-1],
+			ordernum);
+	}
+	kfree(invalid_addr_packet_array);
+
+out_alloc_packet:
+	/* if error, free data */
+	if (retval)
+		kfree(newpacket);
+
+out_noalloc:
+	return retval;
+}
+
+static int packetize_data(void *data, size_t length)
+{
+	int rc = 0;
+	int done = 0;
+	int packet_length;
+	u8 *temp;
+	u8 *end = (u8 *) data + length;
+	pr_debug("packetize_data: data length %d\n", length);
+	if (!rbu_data.packetsize) {
+		printk(KERN_WARNING
+			"dell_rbu: packetsize not specified\n");
+		return -EIO;
+	}
+
+	temp = (u8 *) data;
+
+	/* packetize the hunk */
+	while (!done) {
+		if ((temp + rbu_data.packetsize) < end)
+			packet_length = rbu_data.packetsize;
+		else {
+			/* this is the last packet */
+			packet_length = end - temp;
+			done = 1;
+		}
+
+		if ((rc = create_packet(temp, packet_length)))
+			return rc;
+
+		pr_debug("%lu:%lu\n", temp, (end - temp));
+		temp += packet_length;
+	}
+
+	rbu_data.imagesize = length;
+
+	return rc;
+}
+
+static int do_packet_read(char *data, struct list_head *ptemp_list,
+	int length, int bytes_read, int *list_read_count)
+{
+	void *ptemp_buf;
+	struct packet_data *newpacket = NULL;
+	int bytes_copied = 0;
+	int j = 0;
+
+	newpacket = list_entry(ptemp_list, struct packet_data, list);
+	*list_read_count += newpacket->length;
+
+	if (*list_read_count > bytes_read) {
+		/* point to the start of unread data */
+		j = newpacket->length - (*list_read_count - bytes_read);
+		/* point to the offset in the packet buffer */
+		ptemp_buf = (u8 *) newpacket->data + j;
+		/*
+		 * check if there is enough room in
+		 * * the incoming buffer
+		 */
+		if (length > (*list_read_count - bytes_read))
+			/*
+			 * copy what ever is there in this
+			 * packet and move on
+			 */
+			bytes_copied = (*list_read_count - bytes_read);
+		else
+			/* copy the remaining */
+			bytes_copied = length;
+		memcpy(data, ptemp_buf, bytes_copied);
+	}
+	return bytes_copied;
+}
+
+static int packet_read_list(char *data, size_t * pread_length)
+{
+	struct list_head *ptemp_list;
+	int temp_count = 0;
+	int bytes_copied = 0;
+	int bytes_read = 0;
+	int remaining_bytes = 0;
+	char *pdest = data;
+
+	/* check if we have any packets */
+	if (0 == rbu_data.num_packets)
+		return -ENOMEM;
+
+	remaining_bytes = *pread_length;
+	bytes_read = rbu_data.packet_read_count;
+
+	ptemp_list = (&packet_data_head.list)->next;
+	while (!list_empty(ptemp_list)) {
+		bytes_copied = do_packet_read(pdest, ptemp_list,
+			remaining_bytes, bytes_read, &temp_count);
+		remaining_bytes -= bytes_copied;
+		bytes_read += bytes_copied;
+		pdest += bytes_copied;
+		/*
+		 * check if we reached end of buffer before reaching the
+		 * last packet
+		 */
+		if (remaining_bytes == 0)
+			break;
+
+		ptemp_list = ptemp_list->next;
+	}
+	/*finally set the bytes read */
+	*pread_length = bytes_read - rbu_data.packet_read_count;
+	rbu_data.packet_read_count = bytes_read;
+	return 0;
+}
+
+static void packet_empty_list(void)
+{
+	struct list_head *ptemp_list;
+	struct list_head *pnext_list;
+	struct packet_data *newpacket;
+
+	ptemp_list = (&packet_data_head.list)->next;
+	while (!list_empty(ptemp_list)) {
+		newpacket =
+			list_entry(ptemp_list, struct packet_data, list);
+		pnext_list = ptemp_list->next;
+		list_del(ptemp_list);
+		ptemp_list = pnext_list;
+		/*
+		 * zero out the RBU packet memory before freeing
+		 * to make sure there are no stale RBU packets left in memory
+		 */
+		memset(newpacket->data, 0, rbu_data.packetsize);
+		free_pages((unsigned long) newpacket->data,
+			newpacket->ordernum);
+		kfree(newpacket);
+	}
+	rbu_data.packet_read_count = 0;
+	rbu_data.num_packets = 0;
+	rbu_data.imagesize = 0;
+}
+
+/*
+ * img_update_free: Frees the buffer allocated for storing BIOS image
+ * Always called with lock held and returned with lock held
+ */
+static void img_update_free(void)
+{
+	if (!rbu_data.image_update_buffer)
+		return;
+	/*
+	 * zero out this buffer before freeing it to get rid of any stale
+	 * BIOS image copied in memory.
+	 */
+	memset(rbu_data.image_update_buffer, 0,
+		rbu_data.image_update_buffer_size);
+	if (rbu_data.dma_alloc == 1)
+		dma_free_coherent(NULL, rbu_data.bios_image_size,
+			rbu_data.image_update_buffer, dell_rbu_dmaaddr);
+	else
+		free_pages((unsigned long) rbu_data.image_update_buffer,
+			rbu_data.image_update_ordernum);
+
+	/*
+	 * Re-initialize the rbu_data variables after a free
+	 */
+	rbu_data.image_update_ordernum = -1;
+	rbu_data.image_update_buffer = NULL;
+	rbu_data.image_update_buffer_size = 0;
+	rbu_data.bios_image_size = 0;
+	rbu_data.dma_alloc = 0;
+}
+
+/*
+ * img_update_realloc: This function allocates the contiguous pages to
+ * accommodate the requested size of data. The memory address and size
+ * values are stored globally and on every call to this function the new
+ * size is checked to see if more data is required than the existing size.
+ * If true the previous memory is freed and new allocation is done to
+ * accommodate the new size. If the incoming size is less then than the
+ * already allocated size, then that memory is reused. This function is
+ * called with lock held and returns with lock held.
+ */
+static int img_update_realloc(unsigned long size)
+{
+	unsigned char *image_update_buffer = NULL;
+	unsigned long rc;
+	unsigned long img_buf_phys_addr;
+	int ordernum;
+	int dma_alloc = 0;
+
+	/*
+	 * check if the buffer of sufficient size has been
+	 * already allocated
+	 */
+	if (rbu_data.image_update_buffer_size >= size) {
+		/*
+		 * check for corruption
+		 */
+		if ((size != 0) && (rbu_data.image_update_buffer == NULL)) {
+			printk(KERN_ERR "dell_rbu:%s: corruption "
+				"check failed\n", __FUNCTION__);
+			return -EINVAL;
+		}
+		/*
+		 * we have a valid pre-allocated buffer with
+		 * sufficient size
+		 */
+		return 0;
+	}
+
+	/*
+	 * free any previously allocated buffer
+	 */
+	img_update_free();
+
+	spin_unlock(&rbu_data.lock);
+
+	ordernum = get_order(size);
+	image_update_buffer =
+		(unsigned char *) __get_free_pages(GFP_KERNEL, ordernum);
+
+	img_buf_phys_addr =
+		(unsigned long) virt_to_phys(image_update_buffer);
+
+	if (img_buf_phys_addr > BIOS_SCAN_LIMIT) {
+		free_pages((unsigned long) image_update_buffer, ordernum);
+		ordernum = -1;
+		image_update_buffer = dma_alloc_coherent(NULL, size,
+			&dell_rbu_dmaaddr, GFP_KERNEL);
+		dma_alloc = 1;
+	}
+
+	spin_lock(&rbu_data.lock);
+
+	if (image_update_buffer != NULL) {
+		rbu_data.image_update_buffer = image_update_buffer;
+		rbu_data.image_update_buffer_size = size;
+		rbu_data.bios_image_size =
+			rbu_data.image_update_buffer_size;
+		rbu_data.image_update_ordernum = ordernum;
+		rbu_data.dma_alloc = dma_alloc;
+		rc = 0;
+	} else {
+		pr_debug("Not enough memory for image update:"
+			"size = %ld\n", size);
+		rc = -ENOMEM;
+	}
+
+	return rc;
+}
+
+static ssize_t read_packet_data(char *buffer, loff_t pos, size_t count)
+{
+	int retval;
+	size_t bytes_left;
+	size_t data_length;
+	char *ptempBuf = buffer;
+
+	/* check to see if we have something to return */
+	if (rbu_data.num_packets == 0) {
+		pr_debug("read_packet_data: no packets written\n");
+		retval = -ENOMEM;
+		goto read_rbu_data_exit;
+	}
+
+	if (pos > rbu_data.imagesize) {
+		retval = 0;
+		printk(KERN_WARNING "dell_rbu:read_packet_data: "
+			"data underrun\n");
+		goto read_rbu_data_exit;
+	}
+
+	bytes_left = rbu_data.imagesize - pos;
+	data_length = min(bytes_left, count);
+
+	if ((retval = packet_read_list(ptempBuf, &data_length)) < 0)
+		goto read_rbu_data_exit;
+
+	if ((pos + count) > rbu_data.imagesize) {
+		rbu_data.packet_read_count = 0;
+		/* this was the last copy */
+		retval = bytes_left;
+	} else
+		retval = count;
+
+      read_rbu_data_exit:
+	return retval;
+}
+
+static ssize_t read_rbu_mono_data(char *buffer, loff_t pos, size_t count)
+{
+	unsigned char *ptemp = NULL;
+	size_t bytes_left = 0;
+	size_t data_length = 0;
+	ssize_t ret_count = 0;
+
+	/* check to see if we have something to return */
+	if ((rbu_data.image_update_buffer == NULL) ||
+		(rbu_data.bios_image_size == 0)) {
+		pr_debug("read_rbu_data_mono: image_update_buffer %p ,"
+			"bios_image_size %lu\n",
+			rbu_data.image_update_buffer,
+			rbu_data.bios_image_size);
+		ret_count = -ENOMEM;
+		goto read_rbu_data_exit;
+	}
+
+	if (pos > rbu_data.bios_image_size) {
+		ret_count = 0;
+		goto read_rbu_data_exit;
+	}
+
+	bytes_left = rbu_data.bios_image_size - pos;
+	data_length = min(bytes_left, count);
+
+	ptemp = rbu_data.image_update_buffer;
+	memcpy(buffer, (ptemp + pos), data_length);
+
+	if ((pos + count) > rbu_data.bios_image_size)
+		/* this was the last copy */
+		ret_count = bytes_left;
+	else
+		ret_count = count;
+      read_rbu_data_exit:
+	return ret_count;
+}
+
+static ssize_t read_rbu_data(struct kobject *kobj, char *buffer,
+	loff_t pos, size_t count)
+{
+	ssize_t ret_count = 0;
+
+	spin_lock(&rbu_data.lock);
+
+	if (!strcmp(image_type, "mono"))
+		ret_count = read_rbu_mono_data(buffer, pos, count);
+	else if (!strcmp(image_type, "packet"))
+		ret_count = read_packet_data(buffer, pos, count);
+	else
+		pr_debug("read_rbu_data: invalid image type specified\n");
+
+	spin_unlock(&rbu_data.lock);
+	return ret_count;
+}
+
+static void callbackfn_rbu(const struct firmware *fw, void *context)
+{
+	int rc = 0;
+
+	if (!fw || !fw->size) {
+		rbu_data.entry_created = 0;
+		return;
+	}
+
+	spin_lock(&rbu_data.lock);
+	if (!strcmp(image_type, "mono")) {
+		if (!img_update_realloc(fw->size))
+			memcpy(rbu_data.image_update_buffer,
+				fw->data, fw->size);
+	} else if (!strcmp(image_type, "packet")) {
+		/*
+		 * we need to free previous packets if a
+		 * new hunk of packets needs to be downloaded
+		 */
+		packet_empty_list();
+		if (packetize_data(fw->data, fw->size))
+			/* Incase something goes wrong when we are
+			 * in middle of packetizing the data, we
+			 * need to free up whatever packets might
+			 * have been created before we quit.
+			 */
+			packet_empty_list();
+	} else
+		pr_debug("invalid image type specified.\n");
+	spin_unlock(&rbu_data.lock);
+
+	rc = request_firmware_nowait(THIS_MODULE,
+		"dell_rbu", &rbu_device->dev, &context, callbackfn_rbu);
+	if (rc)
+		printk(KERN_ERR
+			"dell_rbu:%s request_firmware_nowait failed"
+			" %d\n", __FUNCTION__, rc);
+	else
+		rbu_data.entry_created = 1;
+}
+
+static ssize_t read_rbu_image_type(struct kobject *kobj, char *buffer,
+	loff_t pos, size_t count)
+{
+	int size = 0;
+	if (!pos)
+		size = sprintf(buffer, "%s\n", image_type);
+	return size;
+}
+
+static ssize_t write_rbu_image_type(struct kobject *kobj, char *buffer,
+	loff_t pos, size_t count)
+{
+	int rc = count;
+	int req_firm_rc = 0;
+	int i;
+	spin_lock(&rbu_data.lock);
+	/*
+	 * Find the first newline or space
+	 */
+	for (i = 0; i < count; ++i)
+		if (buffer[i] == '\n' || buffer[i] == ' ') {
+			buffer[i] = '\0';
+			break;
+		}
+	if (i == count)
+		buffer[count] = '\0';
+
+	if (strstr(buffer, "mono"))
+		strcpy(image_type, "mono");
+	else if (strstr(buffer, "packet"))
+		strcpy(image_type, "packet");
+	else if (strstr(buffer, "init")) {
+		/*
+		 * If due to the user error the driver gets in a bad
+		 * state where even though it is loaded , the
+		 * /sys/class/firmware/dell_rbu entries are missing.
+		 * to cover this situation the user can recreate entries
+		 * by writing init to image_type.
+		 */
+		if (!rbu_data.entry_created) {
+			spin_unlock(&rbu_data.lock);
+			req_firm_rc = request_firmware_nowait(THIS_MODULE,
+				"dell_rbu",
+				&rbu_device->dev, &context,
+				callbackfn_rbu);
+			if (req_firm_rc) {
+				printk(KERN_ERR
+					"dell_rbu:%s request_firmware_nowait"
+					" failed %d\n", __FUNCTION__, rc);
+				rc = -EIO;
+			} else
+				rbu_data.entry_created = 1;
+
+			spin_lock(&rbu_data.lock);
+		}
+	} else {
+		printk(KERN_WARNING "dell_rbu: image_type is invalid\n");
+		spin_unlock(&rbu_data.lock);
+		return -EINVAL;
+	}
+
+	/* we must free all previous allocations */
+	packet_empty_list();
+	img_update_free();
+	spin_unlock(&rbu_data.lock);
+
+	return rc;
+}
+
+static ssize_t read_rbu_packet_size(struct kobject *kobj, char *buffer,
+	loff_t pos, size_t count)
+{
+	int size = 0;
+	if (!pos) {
+		spin_lock(&rbu_data.lock);
+		size = sprintf(buffer, "%lu\n", rbu_data.packetsize);
+		spin_unlock(&rbu_data.lock);
+	}
+	return size;
+}
+
+static ssize_t write_rbu_packet_size(struct kobject *kobj, char *buffer,
+	loff_t pos, size_t count)
+{
+	unsigned long temp;
+	spin_lock(&rbu_data.lock);
+	packet_empty_list();
+	sscanf(buffer, "%lu", &temp);
+	if (temp < 0xffffffff)
+		rbu_data.packetsize = temp;
+
+	spin_unlock(&rbu_data.lock);
+	return count;
+}
+
+static struct bin_attribute rbu_data_attr = {
+	.attr = {.name = "data",.owner = THIS_MODULE,.mode = 0444},
+	.read = read_rbu_data,
+};
+
+static struct bin_attribute rbu_image_type_attr = {
+	.attr = {.name = "image_type",.owner = THIS_MODULE,.mode = 0644},
+	.read = read_rbu_image_type,
+	.write = write_rbu_image_type,
+};
+
+static struct bin_attribute rbu_packet_size_attr = {
+	.attr = {.name = "packet_size",.owner = THIS_MODULE,.mode = 0644},
+	.read = read_rbu_packet_size,
+	.write = write_rbu_packet_size,
+};
+
+static int __init dcdrbu_init(void)
+{
+	int rc = 0;
+	spin_lock_init(&rbu_data.lock);
+
+	init_packet_head();
+	rbu_device =
+		platform_device_register_simple("dell_rbu", -1, NULL, 0);
+	if (!rbu_device) {
+		printk(KERN_ERR
+			"dell_rbu:%s:platform_device_register_simple "
+			"failed\n", __FUNCTION__);
+		return -EIO;
+	}
+
+	sysfs_create_bin_file(&rbu_device->dev.kobj, &rbu_data_attr);
+	sysfs_create_bin_file(&rbu_device->dev.kobj, &rbu_image_type_attr);
+	sysfs_create_bin_file(&rbu_device->dev.kobj,
+		&rbu_packet_size_attr);
+
+	rc = request_firmware_nowait(THIS_MODULE,
+		"dell_rbu", &rbu_device->dev, &context, callbackfn_rbu);
+	if (rc)
+		printk(KERN_ERR "dell_rbu:%s:request_firmware_nowait"
+			" failed %d\n", __FUNCTION__, rc);
+	else
+		rbu_data.entry_created = 1;
+
+	return rc;
+
+}
+
+static __exit void dcdrbu_exit(void)
+{
+	spin_lock(&rbu_data.lock);
+	packet_empty_list();
+	img_update_free();
+	spin_unlock(&rbu_data.lock);
+	platform_device_unregister(rbu_device);
+}
+
+module_exit(dcdrbu_exit);
+module_init(dcdrbu_init);
+
+/* vim:noet:ts=8:sw=8
+*/
--- ./drivers/firmware/Kconfig.dcd	2004-08-14 09:36:09.000000000 +0400
+++ ./drivers/firmware/Kconfig	2006-02-02 17:09:54.000000000 +0300
@@ -53,4 +53,31 @@ config EFI_PCDP
 
 	  See <http://www.dig64.org/specifications/DIG64_HCDPv20_042804.pdf>
 
+config DELL_RBU
+        tristate "BIOS update support for DELL systems via sysfs"
+        depends on X86
+        select FW_LOADER
+        help
+         Say m if you want to have the option of updating the BIOS for your
+         DELL system. Note you need a Dell OpenManage or Dell Update package (DUP)
+         supporting application to comunicate with the BIOS regarding the new
+         image for the image update to take effect.
+         See <file:Documentation/dell_rbu.txt> for more details on the driver.
+
+config DCDBAS
+        tristate "Dell Systems Management Base Driver"
+        depends on X86
+        help
+          The Dell Systems Management Base Driver provides a sysfs interface
+          for systems management software to perform System Management
+          Interrupts (SMIs) and Host Control Actions (system power cycle or
+          power off after OS shutdown) on certain Dell systems.
+
+          See <file:Documentation/dcdbas.txt> for more details on the driver
+          and the Dell systems on which Dell systems management software makes
+          use of this driver.
+
+          Say Y or M here to enable the driver for use by Dell systems
+          management software such as Dell OpenManage.
+
 endmenu
--- ./drivers/firmware/Makefile.dcd	2006-02-02 17:19:02.000000000 +0300
+++ ./drivers/firmware/Makefile	2006-02-02 17:19:44.000000000 +0300
@@ -4,3 +4,5 @@
 obj-$(CONFIG_EDD)             	+= edd.o
 obj-$(CONFIG_EFI_VARS)		+= efivars.o
 obj-$(CONFIG_EFI_PCDP)		+= pcdp.o
+obj-$(CONFIG_DELL_RBU)          += dell_rbu.o
+obj-$(CONFIG_DCDBAS)		+= dcdbas.o