sys-apps/linux-misc-apps: cleanup

Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>

7 files changed, 0 insertions, 1021 deletions

diff --git a/sys-apps/linux-misc-apps/files/hpfall.confd b/sys-apps/linux-misc-apps/files/hpfall.confd
deleted file mode 100644
index 4f3451b0bff6..000000000000
--- a/sys-apps/linux-misc-apps/files/hpfall.confd
+++ /dev/null
@@ -1,6 +0,0 @@
-# /etc/conf.d/hpfall
-
-# The name of the disk device that hpfall should protect.
-# Usually this is 'sda' or 'hda' the primary master.
-
-DISK="sda"
\ No newline at end of file
diff --git a/sys-apps/linux-misc-apps/files/hpfall.initd b/sys-apps/linux-misc-apps/files/hpfall.initd
deleted file mode 100644
index 8b4930612c4d..000000000000
--- a/sys-apps/linux-misc-apps/files/hpfall.initd
+++ /dev/null
@@ -1,44 +0,0 @@
-#!/sbin/openrc-run
-# Copyright 2012 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-checkconfig() {
-    if [ -z "$DISK" ] ; then
-	eerror "You need to setup DISK in /etc/conf.d/hpfall first"
-	return 1
-    fi
-
-    if [ ! -b /dev/${DISK} ]; then
-        eerror "Could not find disk /dev/${DISK}!"
-        eerror "Adjust the DISK setting in /etc/conf.d/hpfall"
-        return 1
-    fi
-
-    if [ ! -e /sys/block/${DISK}/device/unload_heads ] ; then
-        eerror "No protect entry for ${DISK}!"
-        eerror "Kernel 2.6.28 and above is required"
-        return 1
-    fi
-
-    if [ ! -c /dev/freefall ]; then
-        ebegin "Loading hp_accel module"
-        modprobe hp_accel
-        eend $? || return 1
-    fi
-}
-
-start () {
-    checkconfig || return 1
-
-    ebegin "Starting active hard-drive protection daemon"
-    start-stop-daemon --start --quiet \
-        --exec /usr/sbin/hpfall /dev/${DISK}
-    eend $?
-}
-
-stop() {
-    ebegin "Stopping active hard-drive protection daemon"
-    start-stop-daemon --stop --quiet \
-        --exec /usr/sbin/hpfall
-    eend $?
-}
diff --git a/sys-apps/linux-misc-apps/linux-misc-apps-3.18.ebuild b/sys-apps/linux-misc-apps/linux-misc-apps-3.18.ebuild
deleted file mode 100644
index 4821b1c04c42..000000000000
--- a/sys-apps/linux-misc-apps/linux-misc-apps-3.18.ebuild
+++ /dev/null
@@ -1,172 +0,0 @@
-# Copyright 1999-2020 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=5
-
-inherit versionator eutils toolchain-funcs linux-info ltprune flag-o-matic
-
-DESCRIPTION="Misc tools bundled with kernel sources"
-HOMEPAGE="https://kernel.org/"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~amd64 ~ppc ~x86"
-IUSE="static-libs tcpd"
-
-MY_PV="${PV/_/-}"
-MY_PV="${MY_PV/-pre/-git}"
-
-LINUX_V=$(get_version_component_range 1-2)
-
-if [ ${PV/_rc} != ${PV} ]; then
-	LINUX_VER=$(get_version_component_range 1-2).$(($(get_version_component_range 3)-1))
-	PATCH_VERSION=$(get_version_component_range 1-3)
-	LINUX_PATCH=patch-${PV//_/-}.xz
-	SRC_URI="https://www.kernel.org/pub/linux/kernel/v3.x/testing/${LINUX_PATCH}
-		https://www.kernel.org/pub/linux/kernel/v3.x/testing/v${PATCH_VERSION}/${LINUX_PATCH}"
-elif [ $(get_version_component_count) == 4 ]; then
-	# stable-release series
-	LINUX_VER=$(get_version_component_range 1-3)
-	LINUX_PATCH=patch-${PV}.xz
-	SRC_URI="https://www.kernel.org/pub/linux/kernel/v3.x/${LINUX_PATCH}"
-else
-	LINUX_VER=${PV}
-fi
-
-LINUX_SOURCES=linux-${LINUX_VER}.tar.xz
-SRC_URI="${SRC_URI} https://www.kernel.org/pub/linux/kernel/v3.x/${LINUX_SOURCES}"
-
-# pmtools also provides turbostat
-# usbip available in seperate package now
-RDEPEND="sys-apps/hwids
-		>=dev-libs/glib-2.6
-		tcpd? ( sys-apps/tcp-wrappers )
-		!sys-power/pmtools"
-DEPEND="${RDEPEND}
-		virtual/pkgconfig"
-
-S="${WORKDIR}/linux-${LINUX_VER}"
-
-# All of these are integrated with the kernel build system,
-# No make install, and ideally build with with the root Makefile
-TARGETS_SIMPLE=(
-	Documentation/accounting/getdelays.c
-	Documentation/laptops/dslm.c
-	Documentation/laptops/freefall.c
-	Documentation/networking/timestamping/timestamping.c
-	Documentation/watchdog/src/watchdog-simple.c
-	tools/cgroup/cgroup_event_listener.c
-	tools/lguest/lguest.c
-	tools/vm/slabinfo.c
-	usr/gen_init_cpio.c
-)
-# tools/vm/page-types.c - broken, header path issue
-# tools/hv/hv_kvp_daemon.c - broken in 3.7 by missing linux/hyperv.h userspace
-# Documentation/networking/ifenslave.c - obsolete
-# Documentation/ptp/testptp.c - pending linux-headers-3.0
-
-# These have a broken make install, no DESTDIR
-TARGET_MAKE_SIMPLE=(
-	Documentation/misc-devices/mei:mei-amt-version
-	tools/firewire:nosy-dump
-	tools/power/x86/turbostat:turbostat:../../../../turbostat
-	tools/power/x86/x86_energy_perf_policy:x86_energy_perf_policy
-)
-# tools/perf - covered by dev-utils/perf
-# tools/usb - testcases only
-# tools/virtio - testcaes only
-
-	#for _pattern in {Documentation,scripts,tools,usr,include,lib,"arch/*/include",Makefile,Kbuild,Kconfig}; do
-src_unpack() {
-	unpack ${LINUX_SOURCES}
-
-	MY_A=
-	for _AFILE in ${A}; do
-		[[ ${_AFILE} == ${LINUX_SOURCES} ]] && continue
-		[[ ${_AFILE} == ${LINUX_PATCH} ]] && continue
-		MY_A="${MY_A} ${_AFILE}"
-	done
-	[[ -n ${MY_A} ]] && unpack ${MY_A}
-}
-
-src_prepare() {
-	if [[ -n ${LINUX_PATCH} ]]; then
-		epatch "${DISTDIR}"/${LINUX_PATCH}
-	fi
-
-	sed -i \
-		-e '/^nosy-dump.*LDFLAGS/d' \
-		-e '/^nosy-dump.*CFLAGS/d' \
-		-e '/^nosy-dump.*CPPFLAGS/s,CPPFLAGS =,CPPFLAGS +=,g' \
-		"${S}"/tools/firewire/Makefile
-}
-
-kernel_asm_arch() {
-	a="${1:${ARCH}}"
-	case ${a} in
-		# Merged arches
-		x86|amd64) echo x86 ;;
-		ppc*) echo powerpc ;;
-		# Non-merged
-		alpha|arm|ia64|m68k|mips|sh|sparc*) echo ${1} ;;
-		*) die "TODO: Update the code for your asm-ARCH symlink" ;;
-	esac
-}
-
-src_configure() {
-	:
-}
-
-src_compile() {
-	local karch=$(kernel_asm_arch "${ARCH}")
-	# This is the minimal amount needed to start building host binaries.
-	#emake allmodconfig ARCH=${karch}
-	#emake prepare modules_prepare ARCH=${karch}
-	#touch Module.symvers
-
-	# Now we can start building
-	for s in ${TARGETS_SIMPLE[@]} ; do
-		dir=$(dirname $s) src=$(basename $s) bin=${src%.c}
-		einfo "Building $s => $bin"
-		emake -f /dev/null M=${dir} ARCH=${karch} ${s%.c}
-	done
-
-	for t in ${TARGET_MAKE_SIMPLE[@]} ; do
-		dir=${t/:*} target_binfile=${t#*:}
-		target=${target_binfile/:*} binfile=${target_binfile/*:}
-		[ -z "${binfile}" ] && binfile=$target
-		einfo "Building $dir => $binfile (via emake $target)"
-		emake -C $dir ARCH=${karch} $target
-	done
-}
-
-src_install() {
-	into /usr
-	for s in ${TARGETS_SIMPLE[@]} ; do
-		dir=$(dirname $s) src=$(basename $s) bin=${src%.c}
-		einfo "Installing $s => $bin"
-		dosbin ${dir}/${bin}
-	done
-
-	for t in ${TARGET_MAKE_SIMPLE[@]} ; do
-		dir=${t/:*} target_binfile=${t#*:}
-		target=${target_binfile/:*} binfile=${target_binfile/*:}
-		[ -z "${binfile}" ] && binfile=$target
-		einfo "Installing $dir => $binfile"
-		dosbin ${dir}/${binfile}
-	done
-
-	newconfd "${FILESDIR}"/freefall.confd freefall
-	newinitd "${FILESDIR}"/freefall.initd freefall
-	prune_libtool_files
-}
-
-pkg_postinst() {
-	echo
-	elog "The cpupower utility is maintained separately at sys-power/cpupower"
-	elog "The usbip utility is maintained separately at net-misc/usbip"
-	elog "The hpfall tool has been renamed by upstream to freefall; update your config if needed"
-	if find /etc/runlevels/ -name hpfall ; then
-		ewarn "You must change hpfall to freefall in your runlevels!"
-	fi
-}
diff --git a/sys-apps/linux-misc-apps/linux-misc-apps-3.6-r2.ebuild b/sys-apps/linux-misc-apps/linux-misc-apps-3.6-r2.ebuild
deleted file mode 100644
index 4d1f8227e84b..000000000000
--- a/sys-apps/linux-misc-apps/linux-misc-apps-3.6-r2.ebuild
+++ /dev/null
@@ -1,184 +0,0 @@
-# Copyright 1999-2020 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=5
-
-inherit versionator eutils toolchain-funcs linux-info ltprune autotools flag-o-matic
-
-DESCRIPTION="Misc tools bundled with kernel sources"
-HOMEPAGE="https://kernel.org/"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~amd64 ~ppc ~x86"
-IUSE="static-libs tcpd"
-
-MY_PV="${PV/_/-}"
-MY_PV="${MY_PV/-pre/-git}"
-
-LINUX_V=$(get_version_component_range 1-2)
-
-if [ ${PV/_rc} != ${PV} ]; then
-	LINUX_VER=$(get_version_component_range 1-2).$(($(get_version_component_range 3)-1))
-	PATCH_VERSION=$(get_version_component_range 1-3)
-	LINUX_PATCH=patch-${PV//_/-}.bz2
-	SRC_URI="https://www.kernel.org/pub/linux/kernel/v${LINUX_V}/testing/${LINUX_PATCH}
-		https://www.kernel.org/pub/linux/kernel/v${LINUX_V}/testing/v${PATCH_VERSION}/${LINUX_PATCH}"
-elif [ $(get_version_component_count) == 4 ]; then
-	# stable-release series
-	LINUX_VER=$(get_version_component_range 1-3)
-	LINUX_PATCH=patch-${PV}.bz2
-	SRC_URI="https://www.kernel.org/pub/linux/kernel/v${LINUX_V}/${LINUX_PATCH}"
-else
-	LINUX_VER=${PV}
-fi
-
-LINUX_SOURCES=linux-${LINUX_VER}.tar.bz2
-SRC_URI="${SRC_URI} https://www.kernel.org/pub/linux/kernel/v${LINUX_V}/${LINUX_SOURCES}"
-
-# pmtools also provides turbostat
-# sysfsutils and glib for usbip - remove sysfsutils in 3.7 or 3.8
-RDEPEND="sys-apps/hwids
-		>=sys-fs/sysfsutils-2
-		>=dev-libs/glib-2.6
-		tcpd? ( sys-apps/tcp-wrappers )
-		!sys-power/pmtools
-		!net-misc/usbip"
-DEPEND="${RDEPEND}
-		virtual/pkgconfig"
-
-S="${WORKDIR}/linux-${LINUX_VER}"
-
-# All of these are integrated with the kernel build system,
-# No make install, and ideally build with with the root Makefile
-TARGETS_SIMPLE=(
-	Documentation/accounting/getdelays.c
-	Documentation/cgroups/cgroup_event_listener.c
-	Documentation/laptops/dslm.c
-	Documentation/laptops/hpfall.c
-	Documentation/networking/timestamping/timestamping.c
-	Documentation/watchdog/src/watchdog-simple.c
-	tools/lguest/lguest.c
-	tools/vm/page-types.c
-	tools/vm/slabinfo.c
-	usr/gen_init_cpio.c
-)
-# tools/hv/hv_kvp_daemon.c - broken in 3.7 by missing linux/hyperv.h userspace
-# Documentation/networking/ifenslave.c - obsolete
-# Documentation/ptp/testptp.c - pending linux-headers-3.0
-
-# These have a broken make install, no DESTDIR
-TARGET_MAKE_SIMPLE=(
-	tools/firewire:nosy-dump
-	tools/power/x86/turbostat:turbostat
-	tools/power/x86/x86_energy_perf_policy:x86_energy_perf_policy
-	Documentation/misc-devices/mei:mei-amt-version
-)
-# tools/perf - covered by dev-utils/perf
-# tools/usb - testcases only
-# tools/virtio - testcaes only
-
-	#for _pattern in {Documentation,scripts,tools,usr,include,lib,"arch/*/include",Makefile,Kbuild,Kconfig}; do
-src_unpack() {
-	unpack ${LINUX_SOURCES}
-
-	MY_A=
-	for _AFILE in ${A}; do
-		[[ ${_AFILE} == ${LINUX_SOURCES} ]] && continue
-		[[ ${_AFILE} == ${LINUX_PATCH} ]] && continue
-		MY_A="${MY_A} ${_AFILE}"
-	done
-	[[ -n ${MY_A} ]] && unpack ${MY_A}
-}
-
-src_prepare() {
-	if [[ -n ${LINUX_PATCH} ]]; then
-		epatch "${DISTDIR}"/${LINUX_PATCH}
-	fi
-
-	pushd drivers/staging/usbip/userspace >/dev/null &&
-	eautoreconf -i -f -v &&
-	popd >/dev/null || die "usbip"
-
-	sed -i \
-		-e '/^nosy-dump.*LDFLAGS/d' \
-		-e '/^nosy-dump.*CFLAGS/d' \
-		-e '/^nosy-dump.*CPPFLAGS/s,CPPFLAGS =,CPPFLAGS +=,g' \
-		"${S}"/tools/firewire/Makefile
-}
-
-kernel_asm_arch() {
-	a="${1:${ARCH}}"
-	case ${a} in
-		# Merged arches
-		x86|amd64) echo x86 ;;
-		ppc*) echo powerpc ;;
-		# Non-merged
-		alpha|arm|ia64|m68k|mips|sh|sparc*) echo ${1} ;;
-		*) die "TODO: Update the code for your asm-ARCH symlink" ;;
-	esac
-}
-
-src_configure() {
-	cd drivers/staging/usbip/userspace && \
-	econf \
-		$(use_enable static-libs static) \
-		$(use tcpd || echo --without-tcp-wrappers) \
-		--with-usbids-dir=/usr/share/misc
-}
-
-src_compile() {
-	local karch=$(kernel_asm_arch "${ARCH}")
-	# This is the minimal amount needed to start building host binaries.
-	#emake allmodconfig ARCH=${karch}
-	#emake prepare modules_prepare ARCH=${karch}
-	#touch Module.symvers
-
-	# Now we can start building
-	for s in ${TARGETS_SIMPLE[@]} ; do
-		dir=$(dirname $s) src=$(basename $s) bin=${src%.c}
-		einfo "Building $s => $bin"
-		emake -f /dev/null M=${dir} ARCH=${karch} ${s%.c}
-	done
-
-	for t in ${TARGET_MAKE_SIMPLE[@]} ; do
-		dir=${t/:*} target=${t/*:}
-		einfo "Building $dir => $target"
-		emake -C $dir ARCH=${karch} $target
-	done
-
-	emake -C drivers/staging/usbip/userspace
-}
-
-src_install() {
-	into /usr
-	for s in ${TARGETS_SIMPLE[@]} ; do
-		dir=$(dirname $s) src=$(basename $s) bin=${src%.c}
-		einfo "Installing $s => $bin"
-		dosbin ${dir}/${bin}
-	done
-
-	for t in ${TARGET_MAKE_SIMPLE[@]} ; do
-		dir=${t/:*} target=${t/*:}
-		einfo "Installing $dir => $target"
-		dosbin ${dir}/${target}
-	done
-
-	pushd drivers/staging/usbip/userspace >/dev/null \
-		|| die "Missing usbip/userspace"
-	emake DESTDIR="${D}" install
-
-	newdoc README README.usbip
-	newdoc AUTHORS AUTHORS.usbip
-	dodoc ../usbip_protocol.txt
-	popd >/dev/null
-
-	newconfd "${FILESDIR}"/hpfall.confd hpfall
-	newinitd "${FILESDIR}"/hpfall.initd hpfall
-	prune_libtool_files
-}
-
-pkg_postinst() {
-	echo
-	elog "The cpupower utility is maintained separately at sys-power/cpupower"
-}
diff --git a/sys-apps/linux-misc-apps/linux-misc-apps-4.19.ebuild b/sys-apps/linux-misc-apps/linux-misc-apps-4.19.ebuild
deleted file mode 100644
index 45c7b3fd3bb5..000000000000
--- a/sys-apps/linux-misc-apps/linux-misc-apps-4.19.ebuild
+++ /dev/null
@@ -1,216 +0,0 @@
-# Copyright 1999-2020 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=5
-
-inherit versionator eutils toolchain-funcs linux-info ltprune autotools flag-o-matic
-
-DESCRIPTION="Misc tools bundled with kernel sources"
-HOMEPAGE="https://kernel.org/"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~amd64 ~ppc ~x86"
-IUSE="static-libs tcpd usbip"
-
-MY_PV="${PV/_/-}"
-MY_PV="${MY_PV/-pre/-git}"
-
-LINUX_V=$(get_version_component_range 1-2)
-
-if [ ${PV/_rc} != ${PV} ]; then
-	LINUX_VER=$(get_version_component_range 1-2).$(($(get_version_component_range 3)-1))
-	PATCH_VERSION=$(get_version_component_range 1-3)
-	LINUX_PATCH=patch-${PV//_/-}.xz
-	SRC_URI="https://www.kernel.org/pub/linux/kernel/v3.x/testing/${LINUX_PATCH}
-		https://www.kernel.org/pub/linux/kernel/v3.x/testing/v${PATCH_VERSION}/${LINUX_PATCH}"
-elif [ $(get_version_component_count) == 4 ]; then
-	# stable-release series
-	LINUX_VER=$(get_version_component_range 1-3)
-	LINUX_PATCH=patch-${PV}.xz
-	SRC_URI="https://www.kernel.org/pub/linux/kernel/v3.x/${LINUX_PATCH}"
-else
-	LINUX_VER=${PV}
-fi
-
-LINUX_SOURCES=linux-${LINUX_VER}.tar.xz
-SRC_URI="${SRC_URI} https://www.kernel.org/pub/linux/kernel/v3.x/${LINUX_SOURCES}"
-
-# pmtools also provides turbostat
-# usbip available in seperate package now
-RDEPEND="sys-apps/hwids
-		>=dev-libs/glib-2.6
-		>=sys-kernel/linux-headers-$(get_version_component_range 1-2)
-		usbip? (
-			!net-misc/usbip
-			tcpd? ( sys-apps/tcp-wrappers )
-			virtual/libudev
-		)
-		!sys-power/pmtools"
-DEPEND="${RDEPEND}
-		virtual/pkgconfig"
-
-S="${WORKDIR}/linux-${LINUX_VER}"
-
-# All of these are integrated with the kernel build system,
-# No make install, and ideally build with with the root Makefile
-TARGETS_SIMPLE=(
-	samples/watchdog/watchdog-simple.c
-	tools/accounting/getdelays.c
-	tools/cgroup/cgroup_event_listener.c
-	tools/laptop/freefall/freefall.c
-	tools/testing/selftests/networking/timestamping/timestamping.c
-	tools/vm/slabinfo.c
-	usr/gen_init_cpio.c
-	# Broken:
-	#tools/lguest/lguest.c # fails to compile
-	#tools/vm/page-types.c # page-types.c:(.text+0xe2b): undefined reference to `debugfs__mount', not defined anywhere
-	#tools/net/bpf_jit_disasm.c # /usr/include/x86_64-pc-linux-gnu/bfd.h:35:2: error: #error config.h must be included before this header
-)
-# tools/vm/page-types.c - broken, header path issue
-# tools/hv/hv_kvp_daemon.c - broken in 3.7 by missing linux/hyperv.h userspace
-# Documentation/networking/ifenslave.c - obsolete
-# Documentation/ptp/testptp.c - pending linux-headers-3.0
-
-# These have a broken make install, no DESTDIR
-TARGET_MAKE_SIMPLE=(
-	samples/mei:mei-amt-version
-	tools/firewire:nosy-dump
-	tools/iio:iio_event_monitor
-	tools/iio:iio_generic_buffer
-	tools/iio:lsiio
-	tools/laptop/dslm:dslm
-	tools/power/x86/turbostat:turbostat
-	tools/power/x86/x86_energy_perf_policy:x86_energy_perf_policy
-	tools/thermal/tmon:tmon
-)
-# tools/perf - covered by dev-utils/perf
-# tools/usb - testcases only
-# tools/virtio - testcaes only
-
-	#for _pattern in {Documentation,scripts,tools,usr,include,lib,"arch/*/include",Makefile,Kbuild,Kconfig}; do
-src_unpack() {
-	unpack ${LINUX_SOURCES}
-
-	MY_A=
-	for _AFILE in ${A}; do
-		[[ ${_AFILE} == ${LINUX_SOURCES} ]] && continue
-		[[ ${_AFILE} == ${LINUX_PATCH} ]] && continue
-		MY_A="${MY_A} ${_AFILE}"
-	done
-	[[ -n ${MY_A} ]] && unpack ${MY_A}
-}
-
-src_prepare() {
-	if [[ -n ${LINUX_PATCH} ]]; then
-		epatch "${DISTDIR}"/${LINUX_PATCH}
-	fi
-
-	pushd tools/usb/usbip/ >/dev/null &&
-	sed -i 's/-Werror[^ ]* //g' configure.ac &&
-	eautoreconf -i -f -v &&
-	popd >/dev/null || die "usbip"
-
-	sed -i \
-		-e '/^nosy-dump.*LDFLAGS/d' \
-		-e '/^nosy-dump.*CFLAGS/d' \
-		-e '/^nosy-dump.*CPPFLAGS/s,CPPFLAGS =,CPPFLAGS +=,g' \
-		"${S}"/tools/firewire/Makefile
-}
-
-kernel_asm_arch() {
-	a="${1:${ARCH}}"
-	case ${a} in
-		# Merged arches
-		x86|amd64) echo x86 ;;
-		ppc*) echo powerpc ;;
-		# Non-merged
-		alpha|arm|ia64|m68k|mips|sh|sparc*) echo ${1} ;;
-		*) die "TODO: Update the code for your asm-ARCH symlink" ;;
-	esac
-}
-
-src_configure() {
-	if use usbip; then
-		pushd tools/usb/usbip/ || die
-		econf \
-			$(use_enable static-libs static) \
-			$(use tcpd || echo --without-tcp-wrappers) \
-			--with-usbids-dir=/usr/share/misc
-		popd
-	fi
-}
-
-src_compile() {
-	local karch=$(kernel_asm_arch "${ARCH}")
-	# This is the minimal amount needed to start building host binaries.
-	#emake allmodconfig ARCH=${karch}
-	#emake prepare modules_prepare ARCH=${karch}
-	#touch Module.symvers
-
-	# Now we can start building
-	append-cflags -I./tools/lib
-	for s in ${TARGETS_SIMPLE[@]} ; do
-		dir=$(dirname $s) src=$(basename $s) bin=${src%.c}
-		einfo "Building $s => $bin"
-		emake -f /dev/null M=${dir} ARCH=${karch} ${s%.c}
-	done
-
-	for t in ${TARGET_MAKE_SIMPLE[@]} ; do
-		dir=${t/:*} target_binfile=${t#*:}
-		target=${target_binfile/:*} binfile=${target_binfile/*:}
-		[ -z "${binfile}" ] && binfile=$target
-		einfo "Building $dir => $binfile (via emake $target)"
-		emake -C $dir ARCH=${karch} $target
-	done
-
-	if use usbip; then
-		emake -C tools/usb/usbip
-	fi
-}
-
-src_install() {
-	into /usr
-	for s in ${TARGETS_SIMPLE[@]} ; do
-		dir=$(dirname $s) src=$(basename $s) bin=${src%.c}
-		einfo "Installing $s => $bin"
-		dosbin ${dir}/${bin}
-	done
-
-	for t in ${TARGET_MAKE_SIMPLE[@]} ; do
-		dir=${t/:*} target_binfile=${t#*:}
-		target=${target_binfile/:*} binfile=${target_binfile/*:}
-		[ -z "${binfile}" ] && binfile=$target
-		einfo "Installing $dir => $binfile"
-		dosbin ${dir}/${binfile}
-	done
-
-	if use usbip; then
-		pushd tools/usb/usbip/ >/dev/null || die "usbip"
-		emake DESTDIR="${D}" install
-		newdoc README README.usbip
-		newdoc AUTHORS AUTHORS.usbip
-		popd >/dev/null
-		dodoc Documentation/usb/usbip_protocol.txt
-	fi
-
-	mv -f "${D}"/usr/sbin/{,iio_}generic_buffer
-
-	newconfd "${FILESDIR}"/freefall.confd freefall
-	newinitd "${FILESDIR}"/freefall.initd freefall
-	prune_libtool_files
-}
-
-pkg_postinst() {
-	echo
-	elog "The cpupower utility is maintained separately at sys-power/cpupower"
-	elog "The lguest utility no longer builds, and has been dropped."
-	elog "The hpfall tool has been renamed by upstream to freefall; update your config if needed"
-	if find /etc/runlevels/ -name hpfall ; then
-		ewarn "You must change hpfall to freefall in your runlevels!"
-	fi
-	if use usbip; then
-		elog "For using USB/IP you need to enable USBIP_VHCI_HCD in the client"
-		elog "machine's kernel config and USBIP_HOST on the server."
-	fi
-}
diff --git a/sys-apps/linux-misc-apps/linux-misc-apps-4.4-r1.ebuild b/sys-apps/linux-misc-apps/linux-misc-apps-4.4-r1.ebuild
deleted file mode 100644
index c1ed756f4430..000000000000
--- a/sys-apps/linux-misc-apps/linux-misc-apps-4.4-r1.ebuild
+++ /dev/null
@@ -1,216 +0,0 @@
-# Copyright 1999-2020 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=5
-
-inherit versionator eutils toolchain-funcs linux-info ltprune autotools flag-o-matic
-
-DESCRIPTION="Misc tools bundled with kernel sources"
-HOMEPAGE="https://kernel.org/"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~amd64 ~ppc ~x86"
-IUSE="static-libs tcpd usbip"
-
-MY_PV="${PV/_/-}"
-MY_PV="${MY_PV/-pre/-git}"
-
-LINUX_V=$(get_version_component_range 1-2)
-
-if [ ${PV/_rc} != ${PV} ]; then
-	LINUX_VER=$(get_version_component_range 1-2).$(($(get_version_component_range 3)-1))
-	PATCH_VERSION=$(get_version_component_range 1-3)
-	LINUX_PATCH=patch-${PV//_/-}.xz
-	SRC_URI="https://www.kernel.org/pub/linux/kernel/v3.x/testing/${LINUX_PATCH}
-		https://www.kernel.org/pub/linux/kernel/v3.x/testing/v${PATCH_VERSION}/${LINUX_PATCH}"
-elif [ $(get_version_component_count) == 4 ]; then
-	# stable-release series
-	LINUX_VER=$(get_version_component_range 1-3)
-	LINUX_PATCH=patch-${PV}.xz
-	SRC_URI="https://www.kernel.org/pub/linux/kernel/v3.x/${LINUX_PATCH}"
-else
-	LINUX_VER=${PV}
-fi
-
-LINUX_SOURCES=linux-${LINUX_VER}.tar.xz
-SRC_URI="${SRC_URI} https://www.kernel.org/pub/linux/kernel/v3.x/${LINUX_SOURCES}"
-
-# pmtools also provides turbostat
-# usbip available in seperate package now
-RDEPEND="sys-apps/hwids
-		>=dev-libs/glib-2.6
-		>=sys-kernel/linux-headers-$(get_version_component_range 1-2)
-		usbip? (
-			!net-misc/usbip
-			tcpd? ( sys-apps/tcp-wrappers )
-			virtual/libudev
-		)
-		!sys-power/pmtools"
-DEPEND="${RDEPEND}
-		virtual/pkgconfig"
-
-S="${WORKDIR}/linux-${LINUX_VER}"
-
-# All of these are integrated with the kernel build system,
-# No make install, and ideally build with with the root Makefile
-TARGETS_SIMPLE=(
-	Documentation/accounting/getdelays.c
-	Documentation/laptops/dslm.c
-	Documentation/networking/timestamping/timestamping.c
-	Documentation/watchdog/src/watchdog-simple.c
-	tools/cgroup/cgroup_event_listener.c
-	tools/laptop/freefall/freefall.c
-	tools/vm/slabinfo.c
-	usr/gen_init_cpio.c
-	# Broken:
-	#tools/lguest/lguest.c # fails to compile
-	#tools/vm/page-types.c # page-types.c:(.text+0xe2b): undefined reference to `debugfs__mount', not defined anywhere
-	#tools/net/bpf_jit_disasm.c # /usr/include/x86_64-pc-linux-gnu/bfd.h:35:2: error: #error config.h must be included before this header
-)
-# tools/vm/page-types.c - broken, header path issue
-# tools/hv/hv_kvp_daemon.c - broken in 3.7 by missing linux/hyperv.h userspace
-# Documentation/networking/ifenslave.c - obsolete
-# Documentation/ptp/testptp.c - pending linux-headers-3.0
-
-# These have a broken make install, no DESTDIR
-TARGET_MAKE_SIMPLE=(
-	Documentation/misc-devices/mei:mei-amt-version
-	tools/firewire:nosy-dump
-	tools/iio:generic_buffer
-	tools/iio:iio_event_monitor
-	tools/iio:lsiio
-	tools/power/x86/turbostat:turbostat
-	tools/power/x86/x86_energy_perf_policy:x86_energy_perf_policy
-	tools/thermal/tmon:tmon
-)
-# tools/perf - covered by dev-utils/perf
-# tools/usb - testcases only
-# tools/virtio - testcaes only
-
-	#for _pattern in {Documentation,scripts,tools,usr,include,lib,"arch/*/include",Makefile,Kbuild,Kconfig}; do
-src_unpack() {
-	unpack ${LINUX_SOURCES}
-
-	MY_A=
-	for _AFILE in ${A}; do
-		[[ ${_AFILE} == ${LINUX_SOURCES} ]] && continue
-		[[ ${_AFILE} == ${LINUX_PATCH} ]] && continue
-		MY_A="${MY_A} ${_AFILE}"
-	done
-	[[ -n ${MY_A} ]] && unpack ${MY_A}
-}
-
-src_prepare() {
-	if [[ -n ${LINUX_PATCH} ]]; then
-		epatch "${DISTDIR}"/${LINUX_PATCH}
-	fi
-
-	pushd tools/usb/usbip/ >/dev/null &&
-	sed -i 's/-Werror[^ ]* //g' configure.ac &&
-	eautoreconf -i -f -v &&
-	popd >/dev/null || die "usbip"
-
-	sed -i \
-		-e '/^nosy-dump.*LDFLAGS/d' \
-		-e '/^nosy-dump.*CFLAGS/d' \
-		-e '/^nosy-dump.*CPPFLAGS/s,CPPFLAGS =,CPPFLAGS +=,g' \
-		"${S}"/tools/firewire/Makefile
-}
-
-kernel_asm_arch() {
-	a="${1:${ARCH}}"
-	case ${a} in
-		# Merged arches
-		x86|amd64) echo x86 ;;
-		ppc*) echo powerpc ;;
-		# Non-merged
-		alpha|arm|ia64|m68k|mips|sh|sparc*) echo ${1} ;;
-		*) die "TODO: Update the code for your asm-ARCH symlink" ;;
-	esac
-}
-
-src_configure() {
-	if use usbip; then
-		pushd tools/usb/usbip/ || die
-		econf \
-			$(use_enable static-libs static) \
-			$(use tcpd || echo --without-tcp-wrappers) \
-			--with-usbids-dir=/usr/share/misc
-		popd
-	fi
-}
-
-src_compile() {
-	local karch=$(kernel_asm_arch "${ARCH}")
-	# This is the minimal amount needed to start building host binaries.
-	#emake allmodconfig ARCH=${karch}
-	#emake prepare modules_prepare ARCH=${karch}
-	#touch Module.symvers
-
-	# Now we can start building
-	append-cflags -I./tools/lib
-	for s in ${TARGETS_SIMPLE[@]} ; do
-		dir=$(dirname $s) src=$(basename $s) bin=${src%.c}
-		einfo "Building $s => $bin"
-		emake -f /dev/null M=${dir} ARCH=${karch} ${s%.c}
-	done
-
-	for t in ${TARGET_MAKE_SIMPLE[@]} ; do
-		dir=${t/:*} target_binfile=${t#*:}
-		target=${target_binfile/:*} binfile=${target_binfile/*:}
-		[ -z "${binfile}" ] && binfile=$target
-		einfo "Building $dir => $binfile (via emake $target)"
-		emake -C $dir ARCH=${karch} $target
-	done
-
-	if use usbip; then
-		emake -C tools/usb/usbip
-	fi
-}
-
-src_install() {
-	into /usr
-	for s in ${TARGETS_SIMPLE[@]} ; do
-		dir=$(dirname $s) src=$(basename $s) bin=${src%.c}
-		einfo "Installing $s => $bin"
-		dosbin ${dir}/${bin}
-	done
-
-	for t in ${TARGET_MAKE_SIMPLE[@]} ; do
-		dir=${t/:*} target_binfile=${t#*:}
-		target=${target_binfile/:*} binfile=${target_binfile/*:}
-		[ -z "${binfile}" ] && binfile=$target
-		einfo "Installing $dir => $binfile"
-		dosbin ${dir}/${binfile}
-	done
-
-	if use usbip; then
-		pushd tools/usb/usbip/ >/dev/null || die "usbip"
-		emake DESTDIR="${D}" install
-		newdoc README README.usbip
-		newdoc AUTHORS AUTHORS.usbip
-		popd >/dev/null
-		dodoc drivers/usb/usbip/usbip_protocol.txt
-	fi
-
-	mv -f "${D}"/usr/sbin/{,iio_}generic_buffer
-
-	newconfd "${FILESDIR}"/freefall.confd freefall
-	newinitd "${FILESDIR}"/freefall.initd freefall
-	prune_libtool_files
-}
-
-pkg_postinst() {
-	echo
-	elog "The cpupower utility is maintained separately at sys-power/cpupower"
-	elog "The lguest utility no longer builds, and has been dropped."
-	elog "The hpfall tool has been renamed by upstream to freefall; update your config if needed"
-	if find /etc/runlevels/ -name hpfall ; then
-		ewarn "You must change hpfall to freefall in your runlevels!"
-	fi
-	if use usbip; then
-		elog "For using USB/IP you need to enable USBIP_VHCI_HCD in the client"
-		elog "machine's kernel config and USBIP_HOST on the server."
-	fi
-}
diff --git a/sys-apps/linux-misc-apps/linux-misc-apps-4.4.ebuild b/sys-apps/linux-misc-apps/linux-misc-apps-4.4.ebuild
deleted file mode 100644
index ad1f27593bf9..000000000000
--- a/sys-apps/linux-misc-apps/linux-misc-apps-4.4.ebuild
+++ /dev/null
@@ -1,183 +0,0 @@
-# Copyright 1999-2020 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=5
-
-inherit versionator eutils toolchain-funcs linux-info ltprune flag-o-matic
-
-DESCRIPTION="Misc tools bundled with kernel sources"
-HOMEPAGE="https://kernel.org/"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~amd64 ~ppc ~x86"
-IUSE="static-libs tcpd"
-
-MY_PV="${PV/_/-}"
-MY_PV="${MY_PV/-pre/-git}"
-
-LINUX_V=$(get_version_component_range 1-2)
-
-if [ ${PV/_rc} != ${PV} ]; then
-	LINUX_VER=$(get_version_component_range 1-2).$(($(get_version_component_range 3)-1))
-	PATCH_VERSION=$(get_version_component_range 1-3)
-	LINUX_PATCH=patch-${PV//_/-}.xz
-	SRC_URI="https://www.kernel.org/pub/linux/kernel/v3.x/testing/${LINUX_PATCH}
-		https://www.kernel.org/pub/linux/kernel/v3.x/testing/v${PATCH_VERSION}/${LINUX_PATCH}"
-elif [ $(get_version_component_count) == 4 ]; then
-	# stable-release series
-	LINUX_VER=$(get_version_component_range 1-3)
-	LINUX_PATCH=patch-${PV}.xz
-	SRC_URI="https://www.kernel.org/pub/linux/kernel/v3.x/${LINUX_PATCH}"
-else
-	LINUX_VER=${PV}
-fi
-
-LINUX_SOURCES=linux-${LINUX_VER}.tar.xz
-SRC_URI="${SRC_URI} https://www.kernel.org/pub/linux/kernel/v3.x/${LINUX_SOURCES}"
-
-# pmtools also provides turbostat
-# usbip available in seperate package now
-RDEPEND="sys-apps/hwids
-		>=dev-libs/glib-2.6
-		tcpd? ( sys-apps/tcp-wrappers )
-		!sys-power/pmtools"
-DEPEND="${RDEPEND}
-		virtual/pkgconfig"
-
-S="${WORKDIR}/linux-${LINUX_VER}"
-
-# All of these are integrated with the kernel build system,
-# No make install, and ideally build with with the root Makefile
-TARGETS_SIMPLE=(
-	Documentation/accounting/getdelays.c
-	Documentation/laptops/dslm.c
-	Documentation/networking/timestamping/timestamping.c
-	Documentation/watchdog/src/watchdog-simple.c
-	tools/cgroup/cgroup_event_listener.c
-	tools/laptop/freefall/freefall.c
-	tools/vm/slabinfo.c
-	usr/gen_init_cpio.c
-	# Broken:
-	#tools/lguest/lguest.c # fails to compile
-	#tools/vm/page-types.c # page-types.c:(.text+0xe2b): undefined reference to `debugfs__mount', not defined anywhere
-	#tools/net/bpf_jit_disasm.c # /usr/include/x86_64-pc-linux-gnu/bfd.h:35:2: error: #error config.h must be included before this header
-)
-# tools/vm/page-types.c - broken, header path issue
-# tools/hv/hv_kvp_daemon.c - broken in 3.7 by missing linux/hyperv.h userspace
-# Documentation/networking/ifenslave.c - obsolete
-# Documentation/ptp/testptp.c - pending linux-headers-3.0
-
-# These have a broken make install, no DESTDIR
-TARGET_MAKE_SIMPLE=(
-	Documentation/misc-devices/mei:mei-amt-version
-	tools/firewire:nosy-dump
-	tools/iio:generic_buffer
-	tools/iio:iio_event_monitor
-	tools/iio:lsiio
-	tools/power/x86/turbostat:turbostat
-	tools/power/x86/x86_energy_perf_policy:x86_energy_perf_policy
-	tools/thermal/tmon:tmon
-)
-# tools/perf - covered by dev-utils/perf
-# tools/usb - testcases only
-# tools/virtio - testcaes only
-
-	#for _pattern in {Documentation,scripts,tools,usr,include,lib,"arch/*/include",Makefile,Kbuild,Kconfig}; do
-src_unpack() {
-	unpack ${LINUX_SOURCES}
-
-	MY_A=
-	for _AFILE in ${A}; do
-		[[ ${_AFILE} == ${LINUX_SOURCES} ]] && continue
-		[[ ${_AFILE} == ${LINUX_PATCH} ]] && continue
-		MY_A="${MY_A} ${_AFILE}"
-	done
-	[[ -n ${MY_A} ]] && unpack ${MY_A}
-}
-
-src_prepare() {
-	if [[ -n ${LINUX_PATCH} ]]; then
-		epatch "${DISTDIR}"/${LINUX_PATCH}
-	fi
-
-	sed -i \
-		-e '/^nosy-dump.*LDFLAGS/d' \
-		-e '/^nosy-dump.*CFLAGS/d' \
-		-e '/^nosy-dump.*CPPFLAGS/s,CPPFLAGS =,CPPFLAGS +=,g' \
-		"${S}"/tools/firewire/Makefile
-}
-
-kernel_asm_arch() {
-	a="${1:${ARCH}}"
-	case ${a} in
-		# Merged arches
-		x86|amd64) echo x86 ;;
-		ppc*) echo powerpc ;;
-		# Non-merged
-		alpha|arm|ia64|m68k|mips|sh|sparc*) echo ${1} ;;
-		*) die "TODO: Update the code for your asm-ARCH symlink" ;;
-	esac
-}
-
-src_configure() {
-	:
-}
-
-src_compile() {
-	local karch=$(kernel_asm_arch "${ARCH}")
-	# This is the minimal amount needed to start building host binaries.
-	#emake allmodconfig ARCH=${karch}
-	#emake prepare modules_prepare ARCH=${karch}
-	#touch Module.symvers
-
-	# Now we can start building
-	append-cflags -I./tools/lib
-	for s in ${TARGETS_SIMPLE[@]} ; do
-		dir=$(dirname $s) src=$(basename $s) bin=${src%.c}
-		einfo "Building $s => $bin"
-		emake -f /dev/null M=${dir} ARCH=${karch} ${s%.c}
-	done
-
-	for t in ${TARGET_MAKE_SIMPLE[@]} ; do
-		dir=${t/:*} target_binfile=${t#*:}
-		target=${target_binfile/:*} binfile=${target_binfile/*:}
-		[ -z "${binfile}" ] && binfile=$target
-		einfo "Building $dir => $binfile (via emake $target)"
-		emake -C $dir ARCH=${karch} $target
-	done
-}
-
-src_install() {
-	into /usr
-	for s in ${TARGETS_SIMPLE[@]} ; do
-		dir=$(dirname $s) src=$(basename $s) bin=${src%.c}
-		einfo "Installing $s => $bin"
-		dosbin ${dir}/${bin}
-	done
-
-	for t in ${TARGET_MAKE_SIMPLE[@]} ; do
-		dir=${t/:*} target_binfile=${t#*:}
-		target=${target_binfile/:*} binfile=${target_binfile/*:}
-		[ -z "${binfile}" ] && binfile=$target
-		einfo "Installing $dir => $binfile"
-		dosbin ${dir}/${binfile}
-	done
-
-	mv -f "${D}"/usr/sbin/{,iio_}generic_buffer
-
-	newconfd "${FILESDIR}"/freefall.confd freefall
-	newinitd "${FILESDIR}"/freefall.initd freefall
-	prune_libtool_files
-}
-
-pkg_postinst() {
-	echo
-	elog "The cpupower utility is maintained separately at sys-power/cpupower"
-	elog "The usbip utility is maintained separately at net-misc/usbip"
-	elog "The lguest utility no longer builds, and has been dropped."
-	elog "The hpfall tool has been renamed by upstream to freefall; update your config if needed"
-	if find /etc/runlevels/ -name hpfall ; then
-		ewarn "You must change hpfall to freefall in your runlevels!"
-	fi
-}