net-misc/dahdi-tools: remove unused file

Closes: https://github.com/gentoo/gentoo/pull/3628

1 files changed, 0 insertions, 226 deletions

diff --git a/net-misc/dahdi-tools/files/dahdi-autoconf.init3 b/net-misc/dahdi-tools/files/dahdi-autoconf.init3
deleted file mode 100644
index ac18611f9868..000000000000
--- a/net-misc/dahdi-tools/files/dahdi-autoconf.init3
+++ /dev/null
@@ -1,226 +0,0 @@
-#!/sbin/openrc-run
-# Copyright 1999-2012 Ultimate Linux Solutions CC
-# Distributed under the terms of the GNU General Public License v2
-
-depend() {
-	before dahdi
-	after wanrouter
-}
-
-dahdi_load_modules() {
-	local hwlist loc status mod mod_vname pciid desc
-
-	hwlist=$(/usr/sbin/dahdi_hardware)
-
-	if [ -z "${hwlist}" ]; then
-		einfo "No digium hardware found."
-		ebegin "Loading module dahdi_dummy"
-		/sbin/modprobe dahdi_dummy
-		eend $?
-		return
-	fi
-
-	echo "${hwlist}" | while read loc mod pciid desc; do
-		status="${mod:${#mod}-1:1}"
-		mod="${mod%[+-]}"
-		mod_vname="mod_${mod}"
-
-		einfo "Found $desc at $loc (module: $mod)"
-
-		if [ "${status}" = "-" -a "${!mod_vname-notloaded}" = "notloaded" ]; then
-			ebegin "Loading module $mod"
-			/sbin/modprobe $mod
-			eend
-
-			[ $? -eq 0 ] && eval "$mod_vname=loaded"
-		fi
-	done
-}
-
-dahdi_module_unload() {
-	local mod=$1 s
-	[ -d /sys/module/${mod} ] || return 0
-
-	for s in $(find /sys/module/${mod}/holders -type l); do
-		dahdi_module_unload $(basename $s)
-	done
-
-	ebegin "Removing dahdi module: $mod"
-	/sbin/rmmod $mod
-	eend $?
-}
-
-dahdi_gen_fxo_config() {
-	local port=$1
-
-	echo "fxs${DAHDI_FXO_SIGNALLING-ks}=${port}"
-	[ "${DAHDI_FXO_ECHOCAN-yes}" = yes ] && echo "echocanceller=${DAHDI_ECHOCAN-mg2},${port}"
-}
-
-dahdi_gen_fxs_config() {
-	local port=$1
-
-	echo "fxo${DAHDI_FXO_SIGNALLING-ks}=${port}"
-	[ "${DAHDI_FXS_ECHOCAN-yes}" = yes ] && echo "echocanceller=${DAHDI_ECHOCAN-mg2},${port}"
-}
-
-dahdi_gen_bri_te_config() {
-	span=$1
-	port=$2
-	basechan=$3
-
-	echo "span=${span},${port},0,${DAHDI_BRI_FRAMING-CSS},${DAHDI_BRI_CODING-AMI}"
-	echo "bchan=${basechan}-$(( basechan + 1 ))"
-	echo "hardhdlc=$(( basechan + 2 ))"
-	[ "${DAHDI_BRI_TE_ECHOCAN-yes}" = yes ] && echo "echocanceller=${DAHDI_ECHOCAN-mg2},${basechan}-$(( basechan + 1 ))"
-}
-
-dahdi_gen_bri_nt_config() {
-	span=$1
-	port=$2
-	basechan=$3
-
-	echo "span=${span},0,0,${DAHDI_BRI_FRAMING-CSS},${DAHDI_BRI_CODING-AMI}"
-	echo "bchan=${basechan}-$(( basechan + 1 ))"
-	echo "hardhdlc=$(( basechan + 2 ))"
-	[ "${DAHDI_BRI_NT_ECHOCAN-yes}" = yes ] && echo "echocanceller=${DAHDI_ECHOCAN-mg2},${basechan}-$(( basechan + 1 ))"
-}
-
-dahdi_gen_e1_cpe_config() {
-	span=$1
-	port=$2
-	basechan=$3
-
-	echo "span=${span},${port},0,${DAHDI_E1_FRAMING-CCS},${DAHDI_E1_CODING-HDB3,CRC4}"
-	bchans="${basechan}-$(( basechan + 14 )),$(( basechan + 16 ))-$(( basechan + 30 ))"
-	echo "bchan=${bchans}"
-	echo "dchan=$(( basechan + 15 ))"
-	[ "${DAHDI_E1_CPE_ECHOCAN-yes}" = yes ] && echo "echocanceller=${DAHDI_ECHOCAN-mg2},${bchans}"
-}
-
-dahdi_gen_e1_net_config() {
-	span=$1
-	port=$2
-	basechan=$3
-
-	echo "span=${span},0,0,${DAHDI_E1_FRAMING-CCS},${DAHDI_E1_CODING-HDB3,CRC4}"
-	bchans="${basechan}-$(( basechan + 14 )),$(( basechan + 16 ))-$(( basechan + 30 ))"
-	echo "bchan=${bchans}"
-	echo "dchan=$(( basechan + 15 ))"
-	[ "${DAHDI_E1_NET_ECHOCAN-yes}" = yes ] && echo "echocanceller=${DAHDI_ECHOCAN-mg2},${bchans}"
-}
-
-dahdi_conf_span() {
-	local span=$1
-	local type=$2
-	local desc=$3
-	local port=$4
-	local basechan=$5
-	local vname=""
-
-	# Analog we need to deal with on a port-by-port basis.
-	[ "${type}" = "analog" ] && return 0
-
-	echo -e "\n# ${desc}"
-	case "${type}" in
-		digital-TE)
-			dahdi_gen_bri_te_config "${span}" "${port}" "${basechan}"
-		;;
-		digital-NT)
-			dahdi_gen_bri_nt_config "${span}" "${port}" "${basechan}"
-		;;
-		digital-E1)
-			# Use CPE by default.  Unfortunately there is no easy
-			# way to detect CPE vs NET as far as I know and specifying
-			# in a config that you want NET mode seems the sanest way.
-			vname="PRI_SPAN_${span}_NET"
-			if [[ "${!vname}" = [Yy][Ee][Ss] ]]; then
-				dahdi_gen_e1_net_config "${span}" "${port}" "${basechan}"
-			else
-				dahdi_gen_e1_cpe_config "${span}" "${port}" "${basechan}"
-			fi
-		;;
-		*)
-			echo "# Don't know how to configure this (type=${type})."
-			echo "# Please file a bug on bugs.gentoo.org and add jaco@uls.co.za as CC."
-		;;
-	esac
-}
-
-dahdi_gen_config() {
-	local type manufacturer devicetype basechan aport atype
-	local span=
-	local tfile="$(mktemp)"
-	local sfile="$(mktemp)"
-	local plocation=""
-	local isdnport=0
-
-	/usr/sbin/dahdi_scan > "${sfile}" 
-	exec 3<"${sfile}"
-
-	echo "# Automatically dahdi-autoconf generated file ($(date))." >> "${tfile}"
-	echo "# This file WILL get regenerated whenever you restart dahdi-autoconf." >> "${tfile}"
-
-	while read LINE <&3; do
-		case "$LINE" in
-			[[]*[]])
-				[ -n "${span}" ] && dahdi_conf_span "${span}" "${type}" "${manufacturer} ${devicetype} (${name})" "${isdnport}" "${basechan}" >> "${tfile}"
-				span="${LINE%?}"
-				span="${span#?}"
-			;;
-			type=*|manufacturer=*|devicetype=*|basechan=*|name=*)
-				eval "${LINE%%=*}='${LINE#*=}'"
-			;;
-			location=*)
-				eval "${LINE%%=*}='${LINE#*=}'"
-				if [ "${location}" == "${plocation}" ]; then
-					(( ++isdnport ))
-				else
-					plocation="${location}"
-					isdnport=1
-				fi
-			;;
-			port=*)
-				# For analog cards only.
-				aport="${LINE#*=}"; aport="${aport%,*}"
-				atype="${LINE#*,}"
-				[ "${aport}" -eq "${basechan}" ] && echo -e "\n# ${manufacturer} ${devicetype} (${name})" >> "${tfile}"
-				case "${atype}" in
-					FXO)
-						dahdi_gen_fxo_config $aport >> "${tfile}"
-					;;
-					FXS)
-						dahdi_gen_fxs_config $aport >> "${tfile}"
-					;;
-				esac
-			;;
-		esac
-	done
-	
-	[ -n "${span}" ] && dahdi_conf_span "${span}" "${type}" "${manufacturer} ${devicetype} (${name})" "${isdnport}" "${basechan}" >> "${tfile}"
-
-	echo -e "\nloadzone = ${DAHDI_ZONE}\ndefaultzone = ${DAHDI_ZONE}\n## END OF AUTOCONFIGURED FILE ##" >> "${tfile}"
-
-	exec 3<&-
-
-	rm -f "${sfile}"
-	mv /etc/dahdi/system.conf /etc/dahdi/system.conf.bck
-	mv "${tfile}" /etc/dahdi/system.conf
-}
-
-start() {
-	dahdi_load_modules
-
-	if [ ! -r /dev/dahdi/ctl ]; then
-		eerror "No DAHDI compatible cards detected."
-		return 1
-	fi
-
-	ebegin "Generating DAHDI Configuration"
-	dahdi_gen_config
-	eend $?
-}
-
-stop() {
-	dahdi_module_unload dahdi
-}